首页 | 本学科首页   官方微博 | 高级检索  
     

非对称结构气动分配阀调节特性冷态实验
引用本文:许文波,李云玉,朱建国,吕清刚. 非对称结构气动分配阀调节特性冷态实验[J]. 化学工程, 2010, 38(9)
作者姓名:许文波  李云玉  朱建国  吕清刚
作者单位:中国科学院工程热物理研究所,北京,100190;中国科学院研究生院,北京,100190;中国科学院工程热物理研究所,北京,100190
摘    要:气动分配阀是在循环流化床双回路系统中使用的返料与分流装置,其返料与分流的调节特性直接影响循环流化床双回路系统的运行。通过冷态实验,研究了气动分配阀的各控制风流量以及来料流率对调节特性的影响,结果表明:气动分配阀的调节区域可以划分为截止区、调节区、近饱和区、饱和区,这些区域的调节特性不同;在调节区,通过调节气动分配阀的控制风流量,可改变双侧返料量的比例;在低于单侧最大返料流率时,各侧返料流率随来料流率的增加而线性增加。

关 键 词:气动分配阀  返料  调节特性

Cold experiment of regulating characteristics of pneumatic distribution valve with asymmetric structure
XU Wen-bo,LI Yun-yu,ZHU Jian-guo,L Qing-gang. Cold experiment of regulating characteristics of pneumatic distribution valve with asymmetric structure[J]. Chemical Engineering, 2010, 38(9)
Authors:XU Wen-bo  LI Yun-yu  ZHU Jian-guo  L Qing-gang
Affiliation:XU Wen-bo,LI Yun-yu,ZHU Jian-guo,L(U) Qing-gang
Abstract:A pneumatic distribution valve was used to distribute recirculation ash in a circulating fluidized bed with dual-loop.The stability of the dual-loop was strongly influenced by the regulating characteristics of the pneumatic distribution valve.The effects of the aeration and the solids supplying flow rate in standpipe were investigated on a cold test rig.According to the experimental results,the regulating region was subdivided into cut-off part,adjusting part,approximate saturation part and saturation part with different characteristics in each part.In the adjusting part,the solids distribution proportion of each side can be changed by adjusting the aeration.The solids recirculating rate of each side increases linearly with the increasing of the solids supplying rate in standpipe when it is less than the maximum solid recirculating rate of single-side.
Keywords:pneumatic distribution valve  solids recirculation  regulating characteristics
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号