| 子午线轮胎钢丝帘线受力的参数分析 |
| |
| 引用本文： | 危银涛,熊志远.子午线轮胎钢丝帘线受力的参数分析[J].轮胎工业,2014,34(8):463-438. |
| |
| 作者姓名： | 危银涛 熊志远 |
| |
| 作者单位： | [1]清华大学汽车安全与节能国家重点实验室,北京100084; [2]北华航天工业学院机械工程系,河北廊坊065000 |
| |
| 摘 要： | 采用试验和仿真结合的研究手段对影响全钢载重子午线轮胎钢丝帘线受力的参数进行系统分析。基于试验验证准确性后的模型,着重分析了帘线受力随典型参数变化的敏感性。研究结果表明,充气压力、垂直负荷、带束层宽度、帘线排列密度和铺设角度等参数对子午线轮胎帘线受力的敏感性明显强于带束层厚度和帘线模量。
|
| 关 键 词： | 子午线轮胎 有限元模型 帘线受力 参数敏感性 |
Parameter Analysis on Steel Cord Force of Radial Tire |
| |
| WEI Yintao and XIONG Zhiyuan.Parameter Analysis on Steel Cord Force of Radial Tire[J].Tire Industry,2014,34(8):463-438. |
| |
| Authors: | WEI Yintao and XIONG Zhiyuan |
| |
| Affiliation: | WEI Yin-tao , XIONG Zhi-yuan (1. Tsinghua University,State Key Laboratory of Automotive Safety and Energy, Beijing 100084,Chinas2. North China Institute of Aerospace Engineering,Langfang 065000,China) |
| |
| Abstract: | The influence of parameters on the steel cord force of truck and bus radial tire was systematically analyzed by using numerical and experimental methods. Based on the model which was verified to be correct by test, the sensitivity of the cord force to typical parameters was emphatically analyzed. It was found that the inflation pressure, vertical load, belt width, arrangement density and laying angle of cords showed more significant influence on the steel cord force, while the thickness of belt and modulus of cord had less influence. |
| |
| Keywords: | radial tire finite element model cord foree parameter sensitivity |
| 本文献已被 CNKI 维普 等数据库收录！ |
| 点击此处可从《轮胎工业》浏览原始摘要信息 |
|
点击此处可从《轮胎工业》下载全文 |
|
