| 基于MPI电脑面板注塑模优化设计 |
| |
| 引用本文： | 罗宇玲,曾亚森. 基于MPI电脑面板注塑模优化设计[J]. 机械设计与制造, 2007, 0(8): 184-186 |
| |
| 作者姓名： | 罗宇玲 曾亚森 |
| |
| 作者单位： | 茂名学院,茂名,525000 |
| |
| 摘 要： | 运用流动模拟分析软件MPI(Moldflow Plastics Insight)对电脑面板的注射成型工艺和填充过程进行计算机模拟,分析了模具不同浇口设置对注塑工艺造成的影响.主要通过填充过程工艺参数、熔接痕、气穴等对比分析,以保持注塑过程工艺参数合理和产品质量最好为目的,优化设计了电脑面板模具的浇注系统.
|
| 关 键 词： | MPI 注塑模 电脑面板 浇注系统 优化设计 电脑 面板 注塑模 优化设计 based mould panel computer optimized design analysis 浇注系统 产品质量 注塑过程 气穴 熔接痕 工艺参数 影响 注塑工艺 设置 浇口 |
| 文章编号： | 1001-3997（2007）08-0184-02 |
| 修稿时间： | 2006-09-26 |
Injection analysis and optimized design of the computer panel mould based on MPI |
| |
| LUO Yu-ling,ZENG Ya-sen. Injection analysis and optimized design of the computer panel mould based on MPI[J]. Machinery Design & Manufacture, 2007, 0(8): 184-186 |
| |
| Authors: | LUO Yu-ling ZENG Ya-sen |
| |
| Affiliation: | Maoming College, Maoming 525000,China |
| |
| Abstract: | The injection molding process and packing phase of computer panel are simulated with MPI(Moldflow Plastics Insight).In different gate location of the mould,the effection on injection molding process are analysed.There are packing phase,meld lines,air traps.In comparison,they are analysed.The design of the runner system of the mould is optimized in order to hold reasonable injection molding process and to get product in high quality. |
| |
| Keywords: | MPI Injection mould Computer panel Runner system Optimized design |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
