| 电解Fenton法处理线路板生产废水中有机物质 |
| |
| 引用本文： | 何志毅,陶大钧,王博. 电解Fenton法处理线路板生产废水中有机物质[J]. 水资源保护, 2006, 22(5): 60-62 |
| |
| 作者姓名： | 何志毅 陶大钧 王博 |
| |
| 作者单位： | 1. 无锡市环境科学研究所,江苏,无锡,214023
2. 健鼎,无锡,电子有限公司,江苏,无锡,214101 |
| |
| 摘 要： | 研究了Fenton法对线路板生产废水中有机物质的处理效果,比较传统Fenton法和电解Fenton法处理效果。在同样反应时间里,电解Fenton法的COD平均去除率为55.7%,H2O2的最大投加量为3.75 g/L,而传统Fenton法的COD平均去除率为23.7%,H2O2的投加量为5.45 g/L。确定了电解Fenton法小试装置处理线路板废水的最佳处理条件。
|
| 关 键 词： | Fenton氧化法 线路板废水 有机废水 |
| 文章编号： | 1004-6933（2006）05-0060-03 |
| 收稿时间： | 2005-02-15 |
| 修稿时间： | 2005-02-15 |
Application of electro-Fenton process to treatment of PCB wastewater |
| |
| HE Zhi-yi,TAO Da-jun,WANG Bo. Application of electro-Fenton process to treatment of PCB wastewater[J]. Water Resources Protection, 2006, 22(5): 60-62 |
| |
| Authors: | HE Zhi-yi TAO Da-jun WANG Bo |
| |
| Affiliation: | 1. Wuxi Research Institute of Environmental Sciences, Wuxi 214023, China ; 2. Tripod ( Wuxi |
| |
| Abstract: | The effect of Conventional Fenton process and electro-Fenton process on the treatment of PCB wastewater was studied and compared.In the same reaction time the average removal efficiency of COD by electro-Fenton process was 55.7% and the largest dosage of H_2O_2 was 3.75?g/L,while those of the conventional Fenton process were 23.7% and 5.45?g/L respectively.The optimum reactive condition of the electro-Fenton process during the experiment was decided. |
| |
| Keywords: | Fenton oxidation method PCB wastewater organic wastewater |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《水资源保护》浏览原始摘要信息 |
|
点击此处可从《水资源保护》下载全文 |
|
