| Wear Behavior of PTFE–Hydroxyapatite Composite Fabricated by Hot-Press Sintering Process |
| |
| 摘 要： | In the present work,a new biocompatible composite was fabricated by hot-press sinter-bonding of polytetrafluoroethylene(PTFE)–hydroxyapatite composite.Furthermore,the wear properties of this composite were studied by computer-controlled pin-on-disk type tribometer in reporting volume loss per distance.The investigation was performed in three different fractions of hydroxyapatite(10,20 and 30 wt%).In order to improve the bonding between hydroxyapatite and PTFE,and thus to increase the wear properties of the composite,the effect of adding silane-coupling agent was investigated.Furthermore,to simulate the environment of human body,some of the wear tests were carried out in the ringer's solution.It was found that the wear resistance is improved at high load.Moreover,an optimum fraction of hydroxyapatite(20 wt%) was found in which the best wear resistance is achieved,especially at dry sliding condition.At last,the roles of the factors such as wear load,ringer's solution,and silane-coupling agent are described with respect to their influences on the Lancaster wear coefficient.
|
| 关 键 词： | 羟基磷灰石 热压烧结工艺 复合材料 耐磨耗性 摩擦磨损试验机 硅烷偶联剂 行为 PTFE |
Wear Behavior of PTFE-Hydroxyapatite Composite Fabricated by Hot-Press Sintering Process |
| |
| H.,R.,Zafarani M. Abdi,M.,E.,Bahrololoom. Wear Behavior of PTFE-Hydroxyapatite Composite Fabricated by Hot-Press Sintering Process[J]. Acta Metallurgica Sinica(English Letters), 2014, 0(2): 347-351 |
| |
| Authors: | H. R. Zafarani M. Abdi M. E. Bahrololoom |
| |
| Affiliation: | Department of Materials Science and Engineering, School of Engineering, Shiraz University, Shiraz, Iran |
| |
| Abstract: | Hydroxyapatite composite Polymers Silane-coupling agent Wear resistance |
| |
| Keywords: | Hydroxyapatite composite Polymers Silane-coupling agent Wear resistance |
| 本文献已被 CNKI 维普 等数据库收录！ |
|
