| Abstract: | The characteristics of heat exchangers with offset-type plate fins for space stations are studied for Reynolds numbers less than 300 based on the hydraulic diameter. A three-dimensional analysis is carried out to study the effects of the following parameters on the heat transfer and the flow characteristics: (a) the thermal boundary layer developing on the bottom plate and on the fins on the plate, (b) the aspect ratio (height/pitch) of the cross section of the flow passage, the fin thickness, the fin length in the direction of the flow, the thermal conductivity of the fluid and the fins, and the Prandtl number of the fluid. The results obtained are as follows. (1) The heat-transfer coefficient on the fin surface is characterized by the thermal-conductivity ratio of fluid to fin material. When the thermal conductivity of the fin material approaches that of the fluid, the heat-transfer coefficient on the fin surface becomes low. (2) The optimum condition of the aspect ratio depends on the value of the thermal-conductivity ratio between the fluid and the fins. (3) When the aspect ratio becomes large or small, the friction factor of offset fins approaches that of fully developed duct flow with the same aspect ratio as the Reynolds number decreases. © 1998 Scripta Technica. Heat Trans Jpn Res, 26(4): 249–261, 1997 |
