| 含锑软钎料钎焊黄铜组织与性能的研究 |
| |
| 引用本文： | 潘晖,孙计生,刘效方. 含锑软钎料钎焊黄铜组织与性能的研究[J]. 稀有金属, 2001, 25(3): 195-198 |
| |
| 作者姓名： | 潘晖 孙计生 刘效方 |
| |
| 作者单位： | 北京航空材料研究院焊接与锻压研究室, |
| |
| 摘 要： | 为判断含锑钎料钎焊黄铜是否可行 ,研究了锡铅锑钎料钎焊H6 2黄铜时锑与锌的作用 ,并对其接头的组织与性能进行了深入分析。研究结果表明锡铅锑钎料钎焊黄铜的接头组织中未发现锌锑化合物相 ,含锑量0 2 2 %～ 0 .8% (质量分数 )的锡铅锑钎料钎焊黄铜未引起接头性能下降 ,认为可以钎焊黄铜。
|
| 关 键 词： | 锑 软钎料 黄铜 |
| 文章编号： | 0258-7076(2001)03-0195-04 |
| 修稿时间： | 2000-12-04 |
Study on Microstructures and Properties of Brass Joints Soldered by Solder Containing Antimony |
| |
| Pan Hui,Sun Jisheng,Liu Xiaofang. Study on Microstructures and Properties of Brass Joints Soldered by Solder Containing Antimony[J]. Chinese Journal of Rare Metals, 2001, 25(3): 195-198 |
| |
| Authors: | Pan Hui Sun Jisheng Liu Xiaofang |
| |
| Abstract: | In older to judge if brass can be joined by solder containing antimony, the inter reaction between antimony and zinc was studied, which occurs in the brass H62 joint soldered with tin lead antimony alloy. The microstructure and properties of joints were also analyzed. It could be concluded that no chemical compound of zinc antimony is formed in the brass joints soldered with tin lead antimony alloy, the change of antimony content in the range from 0.22 to 0.8 percent in the solder does not weaken the properties of the joints, and brass can be jointed by it. |
| |
| Keywords: | Antimony Solder Brass |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
