| 确定木结构压弯构件最佳截面尺寸的简便方法 |
| |
| 引用本文： | 任治章,王洪杰. 确定木结构压弯构件最佳截面尺寸的简便方法[J]. 吉林建筑工程学院学报, 2002, 19(1): 18-22 |
| |
| 作者姓名： | 任治章 王洪杰 |
| |
| 作者单位： | 1. 吉林建筑工程学院土木工程系,长春,13002l
2. 吉林建筑工程学院基础科学系,长春,130021 |
| |
| 摘 要： | 在压弯构件的稳定设计中，根据已知设计轴力和弯矩来确定杆（柱）的最佳截面尺寸，当前国内外均采用反复试算的方法，设计过程非常繁琐，本提出一种确定木结构压弯构件最佳截面尺寸的简便方法，使设计工作摆脱了繁琐的试算，大大提高了设计效率。
|
| 关 键 词： | 木结构 压弯构件 木压杆 截面设计 简便方法 |
| 文章编号： | 1009-0185(2002)01-0018-05 |
| 修稿时间： | 2001-04-26 |
Simple Method of Section Design for Rod of Wood to be Compressed and Bended Simultaneously |
| |
| REN Zhi zhang ,WANG Hong jie. Simple Method of Section Design for Rod of Wood to be Compressed and Bended Simultaneously[J]. Journal of Jilin Architectural and Civil Engineering, 2002, 19(1): 18-22 |
| |
| Authors: | REN Zhi zhang WANG Hong jie |
| |
| Affiliation: | REN Zhi zhang 1,WANG Hong jie 2 |
| |
| Abstract: | The design of the section for rod of wood to carry axial load and bending moment known requires trial-and-error calculations to the present at home and abroad,the process is very overelaborate.In this paper,a simple method of section design for rod of wood to be compressed and bended simultaneously has been advanced,which makes the design work get rid of overelaborate trial-and-error calculations and raises design efficiency. |
| |
| Keywords: | compressed rod of wood section design simple method |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
