| 船体中厚板冷压成形的回弹模拟 |
| |
| 引用本文： | 严仁军,李双印,王呈方. 船体中厚板冷压成形的回弹模拟[J]. 塑性工程学报, 2011, 18(4). DOI: 10.3969/j.issn.1007-2012.2011.04.011 |
| |
| 作者姓名： | 严仁军 李双印 王呈方 |
| |
| 作者单位： | 1. 武汉理工大学交通学院,武汉 430063;高性能舰船技术教育部重点实验室(B类),武汉430063
2. 武汉理工大学交通学院,武汉,430063 |
| |
| 基金项目： | 武汉理工大学自主创新研究基金资助项目(2010ZYJT030) |
| |
| 摘 要： | 以船体中厚板材冷压成形为研究对象,基于ANSYS/LS-DYNA数值模拟对成形过程和回弹过程进行分析;以成形件变形量和板厚为变量,研究其对板材回弹的影响规律,并进行了船板冷压回弹试验测量。结果表明,对于船体中厚板材,变形量和板厚对成形件的回弹有着显著的影响,模拟预估值能够达到精度要求。
|
| 关 键 词： | 船体外板 中厚板冷压成形 回弹 冷压成形数值模拟 |
Numerical simulation research on springback of ship plate in multi-point forming mechanism with square press heads |
| |
| YAN Ren-jun,LI Shuang-yin,WANG Cheng-fang. Numerical simulation research on springback of ship plate in multi-point forming mechanism with square press heads[J]. Journal of Plasticity Engineering, 2011, 18(4). DOI: 10.3969/j.issn.1007-2012.2011.04.011 |
| |
| Authors: | YAN Ren-jun LI Shuang-yin WANG Cheng-fang |
| |
| Affiliation: | YAN Ren-jun1,2 LI Shuang-yin1 WANG Cheng-fang1(1.School of Transportation,Wuhan University of Technology,Wuhan 430063 China)(2.Key Lab.of High Speed Ship Engineering of Ministry of Education,Wuhan 430063 China) |
| |
| Abstract: | Multi-point forming mechanism with square press heads is a new forming process for 3D ship hull plate.The impact of curvature and thickness to springback of ship hull plate was discussed by ANSYS/LS-DYNA software.The influence of curvature was also proved by the experiment.Results indicate that springback ratio is influenced by curvature and plate thickness significantly,and the value of springback forecast by simulation achieves a considerable accuracy. |
| |
| Keywords: | ship hull plate cold forming springback numerical simulation of cold forming |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
