| 基于FPGA的SRM控制器研究与实现 |
| |
| 引用本文： | 孙思兵,蒋冬青,朱学忠. 基于FPGA的SRM控制器研究与实现[J]. 电力电子技术, 2007, 41(3): 12-14 |
| |
| 作者姓名： | 孙思兵 蒋冬青 朱学忠 |
| |
| 作者单位： | 南京航空航天大学,江苏,南京,210016;南京航空航天大学,江苏,南京,210016;南京航空航天大学,江苏,南京,210016 |
| |
| 摘 要： | 介绍了开关磁阻电机(Switched Reluctance Motor,简称SRM)控制器目前所用的两种位置信号处理方式,及其各自存在的问题,在此基础上,提出了以现场可编程门阵列(Field Programmable Gate Array,简称FPGA)为位置信号处理器设计SRM控制器的方法.阐述了基于FPGA的SRM控制器的软硬件设计,给出了12/8和6/2两种结构的SRM采用该控制器电动运行的实验结果.
|
| 关 键 词： | 磁阻电动机 软件 硬件 控制器/位置信号解算 |
| 文章编号： | 1000-100X（2007）03-0012-03 |
| 修稿时间： | 2006-09-15 |
Research and Implemention of SRM Controller based on FPGA |
| |
| SUN Si-bing,JIANG Dong-qing,ZHU Xue-zhong. Research and Implemention of SRM Controller based on FPGA[J]. Power Electronics, 2007, 41(3): 12-14 |
| |
| Authors: | SUN Si-bing JIANG Dong-qing ZHU Xue-zhong |
| |
| Affiliation: | Nanjing University of Aeronautics and Astronautics,Nanjing 210016,China |
| |
| Abstract: | Based on introducing two processing methods dealing with position signal and their problems in Switched Reluctance Motor(SRM) controllers at present,this paper puts forward a method in which the Field Programmable Gate Array(FPGA) becomes the position signal processor in designing of SRM controllers.Then,the hardware and software of the SRM controller based on FPGA are described.Finally the experimental results of two SRMs with 12/8 and 6/2 structure using this controller are presented. |
| |
| Keywords: | reluctance motor software hardware controller/calculating of position signal |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
