| 一种新型的热轧带钢平坦度测量系统 |
| |
| 引用本文： | 孙剑,张杰,苏兰海,曹建国.一种新型的热轧带钢平坦度测量系统[J].钢铁研究学报,2008,20(3):54-0. |
| |
| 作者姓名： | 孙剑 张杰 苏兰海 曹建国 |
| |
| 作者单位： | 北京科技大学机械工程学院,北京,100083 |
| |
| 摘 要： | 研究了一种新型的基于数字投影技术和条纹边缘检测技术的平坦度测量系统，阐述了该系统的测量原理、系统组成、标定方法及平坦度计算等。该系统采用的投影条纹法系三维全场式测量方法，能克服带钢垂直运动对测量的不利影响，与目前常用的平坦度测量方法相比，其抗干扰能力更强，测量结果更准确，并且硬件成本比较低。
|
| 关 键 词： | 平坦度 投影条纹法 系统标定 |
| 文章编号： | 1001-0963(2008)03-0054-05 |
| 收稿时间： | 1900-01-01; |
New Type Flatness Measuring System for Hot Rolled Steel Strip |
| |
| SUN Jian,ZHANG Jie,SU Lan-hai,CAO Jian-guo.New Type Flatness Measuring System for Hot Rolled Steel Strip[J].Journal of Iron and Steel Research,2008,20(3):54-0. |
| |
| Authors: | SUN Jian ZHANG Jie SU Lan-hai CAO Jian-guo |
| |
| Affiliation: | School of Mechanical Engineering, University of Science and Technology Beijing, Beijing 100083, China |
| |
| Abstract: | A new flatness measuring system based on the techniques of digital projection and fringe edge detection has been developed. The measuring principle, hardware constituent and system calibration, flatness calculation, and so on are discussed. This system adopts a 3 dimensional measuring method called projected fringe method, and it can avoid the defective effect caused by the vertical motion of the steel strip. Comparing with the present flatness measuring systems which are applied widespreadly, its capability of anti interference is higher, the measuring results are more accurate and it costs less. |
| |
| Keywords: | flatness projected fringe method system calibration |
| 本文献已被 维普 万方数据 等数据库收录！ |
| 点击此处可从《钢铁研究学报》浏览原始摘要信息 |
|
点击此处可从《钢铁研究学报》下载全文 |
|
