| 基于阀式浇注技术的注塑件熔接痕控制 |
| |
| 引用本文： | 谭文胜,周建忠.基于阀式浇注技术的注塑件熔接痕控制[J].工程塑料应用,2006,34(7):37-39. |
| |
| 作者姓名： | 谭文胜 周建忠 |
| |
| 作者单位： | 1. 江苏大学机械工程学院,镇江,212013;常州工学院,常州,213002
2. 江苏大学机械工程学院,镇江,212013 |
| |
| 基金项目： | 江苏省高校自然科学基金 |
| |
| 摘 要： | 通过对注塑件熔接痕形成机理的研究,阐述阀式浇注技术对熔接痕的控制原理,以注射成型某平板为例,将其模具浇注系统的流道设计为热流道,并采用阀式浇注,采用CAE软件对充填过程进行模拟。结果表明,采用阀式浇注技术对控制熔接痕取得了较好的效果。
|
| 关 键 词： | 注塑件 阀式浇注 熔接痕 CAE 模拟 |
| 收稿时间： | 2006-03-21 |
| 修稿时间： | 2006年3月21日 |
CONTROL OF WELD MARKS OF PLASTIC PART BASED ON VALVE-INJECTION |
| |
| Tan Wensheng,Zhou Jianzhong.CONTROL OF WELD MARKS OF PLASTIC PART BASED ON VALVE-INJECTION[J].Engineering Plastics Application,2006,34(7):37-39. |
| |
| Authors: | Tan Wensheng Zhou Jianzhong |
| |
| Affiliation: | 1. School of Mechanical Engineering, Jiangsu University, Zhenjiang 212013, China; 2. Changzhou Institute of Technology, Changzhou 213002, China |
| |
| Abstract: | The control principle of valve-injection on weld marks is analyzed based on studying the forming mechanism of weld marks.The runners of mould gating system are designed to hot styles and they are controlled by valves with a injection molding panel as example,and the filling process is simulated by CAE software.The results show that the weld marks are well controlled by this method. |
| |
| Keywords: | injection molding part valve-injection weld mark CAE simulation |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
