Single-walled carbon nanotube network/poly composite thin film for flow sensor |
| |
Authors: | Hui Cao Zhiyin Gan Qiang Lv Han Yan Xiaobin Luo Xiaohui Song Sheng Liu |
| |
Affiliation: | 1. School of Mechanical Science and Engineering, Huazhong University of Science and Technology, Wuhan, China 2. Institute of Microsystems, Wuhan National Laboratory for Optoelectronics, No.1037, Luoyu Road, Wuhan, 430074, China 3. Department of Electronic Science and Technology, Huazhong University of Science and Technology, Wuhan, China 4. School of Energy and Power Engineering, Huazhong University of Science and Technology, Wuhan, China 5. Research Institute of Micro/Nano Science and Technology, Shanghai Jiao Tong University, Shanghai, China
|
| |
Abstract: | A fabrication method about single-walled carbon nanotube (SWCNT) network and polydimethylsiloxane (PDMS) based composite thin film is reported, which can be used as flow sensor cell. This composite thin film is immersed in deionized water and salt solution with different flow rate tests. The morphology of SWCNTs on the surface of the composite thin film is characterized by scanning electron microscopy, revealing the SWCNTs are coated by PDMS chains. The induced voltage generates along the direction of the flowing liquid and depends significantly on the ionic concentration and flow velocity. Since the SWCNTs are fixed into PDMS matrix, the I–V curves of the composite thin film before and after several flow velocity measurements are exactly coincident, and the repeating flow-induced voltage experiment shows the composite thin film has a reliable electric characteristic and wide potential of device application. |
| |
Keywords: | |
本文献已被 SpringerLink 等数据库收录! |
|