| 截面包络法加工复杂螺旋面的几何仿真算法 |
| |
| 引用本文： | 赵文珍,周春雷.截面包络法加工复杂螺旋面的几何仿真算法[J].机械设计与制造,2006(1):83-85. |
| |
| 作者姓名： | 赵文珍 周春雷 |
| |
| 作者单位： | 沈阳工业大学,机械工程学院,沈阳,110023 |
| |
| 摘 要： | 以截面包络法数控加工螺旋面为例,给出了一种基于啮合基本定理的点接触包络加工表面的几何仿真算法。通过分析数控加工中刀具与工件的相对进给运动,得到刀触点的啮合方程式,由此可求得加工表面上的刀触点—几何仿真点。几何仿真的计算结果,用于螺杆加工的编程误差分析取得了良好的效果,对于提高数控编程精度具有重要意义
|
| 关 键 词： | 包络 螺旋面 仿真 啮合 |
| 文章编号： | 1001-3997(2006)01-0083-02 |
| 收稿时间： | 2005-05-05 |
| 修稿时间： | 2005年5月5日 |
The algorithm of geometry simulation in machining complex helicoids with section envelope method |
| |
| ZHAO Wen-zhen,ZHOU Chun-Lei.The algorithm of geometry simulation in machining complex helicoids with section envelope method[J].Machinery Design & Manufacture,2006(1):83-85. |
| |
| Authors: | ZHAO Wen-zhen ZHOU Chun-Lei |
| |
| Affiliation: | School of Mechanical Engineering, Shenyang University of Technology, Shenyang 110023, China |
| |
| Abstract: | Take the case of helicoids that machined with section envelope method,base on the basic theory of engagement,this paper presents an algorithm of geometry simulation in machining curves with point-contact envelope method.By analyzing the relative motions of cutter and workpiece in NC machining,the engagement equation of cutter contact(CC)point is taken out,therefore the CC points on process surface,that is geometry simulation points,can be evaluated.The result of geometry simulation is effectively used for analysis of programming error in machining screw,which has an important significance for improving NC programming precision. |
| |
| Keywords: | Envelope Helicoids Simulation Engagement |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
