| 均匀设计法优化多功能钢铁表面处理液的制备 |
| |
| 引用本文： | 袁军,徐军,郑敏,李玉含. 均匀设计法优化多功能钢铁表面处理液的制备[J]. 化学与生物工程, 2010, 27(3): 84-85,89 |
| |
| 作者姓名： | 袁军 徐军 郑敏 李玉含 |
| |
| 作者单位： | 武汉工程大学,湖北省新型反应器与绿色化学工艺重点实验室,湖北,武汉,430073;武汉双博新技术有限公司,湖北,武汉,430073 |
| |
| 摘 要： | 利用均匀设计和二次回归分析的方法对多功能钢铁表面处理液的制备工艺进行了研究。确定制备多功能钢铁表面处理液的优化配方为:有机酸0.5%、磷酸30%、六次甲基四胺2%和成膜助剂0.2%,验证实验结果与理论结果基本相符,处理后的钢样表面磷化膜厚度为18.7μm、除锈能力为8.1 min、磷化膜耐蚀时间为68 s。
|
| 关 键 词： | 均匀设计 二次回归分析 表面处理 |
Optimization of Preparation of Multifunctional Solution for Steel and Iron Surface Treatment Using Homogeneous Design |
| |
| YUAN Jun,XU Jun,ZHENG Min,LI Yu-han. Optimization of Preparation of Multifunctional Solution for Steel and Iron Surface Treatment Using Homogeneous Design[J]. Chemistry & Bioengineering, 2010, 27(3): 84-85,89 |
| |
| Authors: | YUAN Jun XU Jun ZHENG Min LI Yu-han |
| |
| Affiliation: | 1.Hubei Key Lab of Novel Reactor and Green Chemical Technology;Wuhan Institute of Technology;Wuhan430073;China;2.Wuhan Shuangbo New Technology Limited Company;China |
| |
| Abstract: | The preparation of multifunctional solution for steel and iron surface treatment are studied using homogeneous design and square regression analysis.It has been found the optimum gradient of multifunctional solution for steel and iron surface treatment contains organic acid of 0.5%,phosphoric acid of 30%,hexamine of 2% and film-forming additives of 0.2%.The verifying experiment result proves that experiment result is ac-corded with theory result basically.The thickness and corrosion resistant time of the ph... |
| |
| Keywords: | homogeneous design square regression analysis surface treatment |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
