首页 | 本学科首页   官方微博 | 高级检索  
     

纯Mg表面TiO_2薄膜的耐蚀性研究
引用本文:谢奉妤,高家诚,胡德,张敏.纯Mg表面TiO_2薄膜的耐蚀性研究[J].材料导报,2012,26(4):18-21.
作者姓名:谢奉妤  高家诚  胡德  张敏
作者单位:重庆大学国家镁合金材料工程技术研究中心,重庆400030;重庆大学材料科学与工程学院,重庆400045
摘    要:以四氯化钛为前驱体,去离子水为溶剂,盐酸为抑制剂,采用溶胶-凝胶法制得TiO2溶胶。采用浸渍-提拉技术在纯镁基体上制得TiO2薄膜,以提高纯镁基体的耐蚀性。通过正交实验,以电化学阻抗值作为评价标准,研究了热处理温度、涂层次数、溶胶浓度对试样耐腐蚀性的影响。结果表明,溶胶浓度为0.5%、涂层次数为3、热处理温度为100℃时得到的TiO2薄膜具有最好的耐蚀性。

关 键 词:二氧化钛  纯Mg  腐蚀  电化学阻值

Study on Corrosion Resistance of TiO2 Films on the Pure Mg Surface
XIE Fengyu , GAO Jiacheng , HU De , ZHANG Min.Study on Corrosion Resistance of TiO2 Films on the Pure Mg Surface[J].Materials Review,2012,26(4):18-21.
Authors:XIE Fengyu  GAO Jiacheng  HU De  ZHANG Min
Affiliation:(National Engineering Research Center for Magnesium Alloys,Chongqing University,Chongqing 400030;Materials Science & Engineering College,Chongqing University,Chongqing 400045)
Abstract:TiO2 sol,prepared by sol-gel technique using titanium tetrachloride as precursor,deionized water as solvent and HCl as inhibiter,was coated on pure magnesium(Mg) by the method of dip-coating to improve the matrix corrosion resistance.The effects of the heat-treatment temperature,coating times and sol concentration on the corrosion resistance of the samples were investigated by the orthogonalizing analysis,where electrochemical impedance va-lue was chosen as evaluation criteria.According to the results,the optimal synthesis route was 0.5% sol concentration,3 coating times,and 100℃ heat-treatment temperature where TiO2-coated Mg had the best corrosion resistance.
Keywords:TiO2  pure Mg  corrosion  electrochemical resistance
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号