| Mg-3Al-6Zn-2Y合金在不同应变率加载下的力学性能研究 |
| |
| 引用本文： | 梁浩,张方举,谭云,胡文军,王敬丰,潘复生.Mg-3Al-6Zn-2Y合金在不同应变率加载下的力学性能研究[J].材料导报,2012,26(12):39-41,51. |
| |
| 作者姓名： | 梁浩 张方举 谭云 胡文军 王敬丰 潘复生 |
| |
| 作者单位： | 1. 中国工程物理研究院总体工程研究所,绵阳,621900
2. 重庆大学材料科学与工程学院,重庆,400044 |
| |
| 基金项目： | 中国工程物理研究院科学技术发展基金 |
| |
| 摘 要： | 在不同应变率压缩与拉伸下,研究了Mg-3Al-6Zn-2Y合金的力学性能,发现两种条件下合金力学性能变化规律不同。压缩情况下,随应变率增大,合金的流变应力增大,极限强度、屈服强度、破坏应变先增大后减小,塑性先增大后减小;拉伸情况下,随应变率增大,合金的流变应力、极限强度、屈服强度先增大后减小,破坏应变减小,塑性减小。压缩情况下合金流变应力的应变率敏感性高于拉伸情况。
|
| 关 键 词： | 镁合金 应变率 流变应力 敏感性 |
Research on Mechanics Properties for Mg-3Al-6Zn-2Y Loaded at Different Strain Rates |
| |
| LIANG Hao
,
ZHANG Fangju
,
TAN Yun
,
HU Wenjun
,
WANG Jingfeng
,
PAN Fusheng.Research on Mechanics Properties for Mg-3Al-6Zn-2Y Loaded at Different Strain Rates[J].Materials Review,2012,26(12):39-41,51. |
| |
| Authors: | LIANG Hao ZHANG Fangju TAN Yun HU Wenjun WANG Jingfeng PAN Fusheng |
| |
| Affiliation: | 1 Institute of System Engineering,China Academy of Engineering and Physics,Mianyang 621900;2 School of Materials Science and Engineering,Chongqing University,Chongqing 400044) |
| |
| Abstract: | The mechanics properties of Mg-3Al-6Zn-2Y alloy were investigated under compression and tension at varied strain rates.It was found that the properties were different at the two conditions.The alloy′s flowing stress increased with the increasing strain rates,at the same time,the ultimate stress,yield stress,fracture strain and plasticity increased firstly and decreased then,when it was compressed.The alloy′s flowing stress,ultimate stress and yield stress increased firstly and then decreased with increasing strain rates,at the same time,the fracture strain and plasticity decreased,when it was tensed.The sensitivity of flowing stress to strain rates under compression was higher than that under tension condition. |
| |
| Keywords: | magnesium alloy strain rate flowing stress sensitivity |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
