首页 | 本学科首页   官方微博 | 高级检索  
     

一种提高雷达作用距离的有效方法
引用本文:刘延峰,潘泉,张冠杰. 一种提高雷达作用距离的有效方法[J]. 控制与决策, 2006, 21(8): 885-888
作者姓名:刘延峰  潘泉  张冠杰
作者单位:西北工业大学,自动化学院,西安,710072;西安206研究所,西安,710100
基金项目:“十五”国防预研基金项目(YJ0267070).
摘    要:雷达的作用距离与雷达对目标的最低可检测信噪比直接相关,现代雷达要达到对目标的可靠检测,一般要求单个脉冲的信噪比为13dB左右.为此,将低门限检测、卡尔曼滤波与动态规划算法相结合,以在雷达中实现检测前跟踪,并给出了检测前跟踪与检测后跟踪相衔接的方法.该方法使雷达将可靠检测的信噪比降到7dB左右,相当于将雷达的最大作用距离提高了近40%.仿真结果表明,所提出的方法是可行而有效的。

关 键 词:检测前跟踪  非相参积累  动态规划  卡尔曼滤波
文章编号:1001-0920(2006)08-0885-04
收稿时间:2005-06-15
修稿时间:2005-08-03

Efficient Approach to Enhance Maximum Radar Range
LIU Yan-feng,PAN Quan,ZHANG Guan-jie. Efficient Approach to Enhance Maximum Radar Range[J]. Control and Decision, 2006, 21(8): 885-888
Authors:LIU Yan-feng  PAN Quan  ZHANG Guan-jie
Abstract:The maximum radar range is related closely with radar minimum detectable signal-to-noise ratio(SNR).To achieve reliable radar detection,the SNR of a single pulse is usually required to be about 13dB.A method combining low threshold detection,Kalman filtering and dynamic programming algorithm is firstly employed to realize track-before-detect.By applying this method,reliable detectable SNR of the radar can be decreased to about 7 dB,which means that the maximum radar range is increased by around 40%. Link-up process between track-before-detect and track-after-detect as well as simulation results show the effectiveness of the method.
Keywords:Track-before-detect    Noncoherent integration   Dynamic programming   Kalman filtering
本文献已被 CNKI 维普 万方数据 等数据库收录!
点击此处可从《控制与决策》浏览原始摘要信息
点击此处可从《控制与决策》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号