首页 | 本学科首页   官方微博 | 高级检索  
     

锥面-微孔组合端面机械密封性能
引用本文:彭旭东,刘鑫,孟祥铠,白少先,盛颂恩.锥面-微孔组合端面机械密封性能[J].化工学报,2011,62(12):3463-3470.
作者姓名:彭旭东  刘鑫  孟祥铠  白少先  盛颂恩
作者单位:浙江工业大学过程装备及其再制造教育部工程研究中心,浙江 杭州 310032
基金项目:国家科技支撑计划项目(2011BAF09B05-07); 国家自然科学基金项目(50775206,51005209); 浙江省杰出青年人才基金项目(R1090833); 浙江省自然科学基金项目(Y1090807)~~
摘    要:在收敛锥面密封和多孔端面机械密封研究的基础上,提出了锥面-微孔组合端面新型机械密封,建立了该组合密封端面液膜压力控制的理论模型并采用有限元法求解,获得了端面液膜压力分布.在给定径向微孔比、周向微孔比和微孔深径比等微孔几何结构参数的条件下,分析了端面锥度、锥面宽度比、扇形微孔区的径向位置等组合密封几何结构参数在低压和高压...

关 键 词:机械密封  微孔端面  锥面  密封性能  有限元分析法

Performance of mechanical face seals with both surface micropores and convergent coning
PENG Xudong,LIU Xin,MENG Xiangkai,BAI Shaoxian,SHENG Song'en.Performance of mechanical face seals with both surface micropores and convergent coning[J].Journal of Chemical Industry and Engineering(China),2011,62(12):3463-3470.
Authors:PENG Xudong  LIU Xin  MENG Xiangkai  BAI Shaoxian  SHENG Song'en
Affiliation:PENG Xudong,LIU Xin,MENG Xiangkai,BAI Shaoxian,SHENG Song'en(MOE Engineering Research Center of Process Equipment and Its Remanufacture,Zhejiang University of Technology,Hangzhou 310032,Zhejiang,China)
Abstract:Based on the study of mechanical face seals with convergent coning or surface micropores,a new type of mechanical seal with both surface micropores and convergent coning was presented.The definitions of face geometric parameters of such a new type of seal were made.Such parameters included the radial taper of the coned face,the width ratio of the coned face to the seal face,and the width ratio of sealing dam to seal face.A theoretical analysis model for controlling fluid film pressure between the two faces ...
Keywords:mechanical seal  surface micropore  taper face  seal performance  finite element method  
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《化工学报》浏览原始摘要信息
点击此处可从《化工学报》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号