| 注塑模具受力畸变约束条件建立 |
| |
| 引用本文： | 许勇顺 黄瑞清. 注塑模具受力畸变约束条件建立[J]. 模具技术, 1997, 0(3): 8-12 |
| |
| 作者姓名： | 许勇顺 黄瑞清 |
| |
| 作者单位： | 上海交通大学塑性成形工程系国家模具CAD研究工程中心 200030(许勇顺，黄瑞清)，上海交通大学塑性成形工程系国家模具CAD研究工程中心 200030(阮雪榆) |
| |
| 摘 要： | 简述了产生塑件溢流的三种主要影响因素，通过分析受力，建立了由于模具受力发生畸变的约束性条件及模具分型面的尺寸约束条件。
|
| 关 键 词： | 注塑模 畸变 溢流 约束条件 |
Building up Constraining Conditions of Inection Mould Deformation |
| |
| Xu Yongshun et al. Building up Constraining Conditions of Inection Mould Deformation[J]. Die and Mould Technology, 1997, 0(3): 8-12 |
| |
| Authors: | Xu Yongshun et al |
| |
| Affiliation: | Xu Yongshun et al |
| |
| Abstract: | Three kinds of main factors which cause flash of plastics parts were sim-plely introduced in this paper, and through analysing various forces, constraining conditions were built up and at the same time sizing conditions were also given |
| |
| Keywords: | Injection molding Mold deformation Flash |
| 本文献已被 CNKI 维普 等数据库收录！ |
