| 热带粗轧机组立轧非稳定轧制阶段变形规律的实验研究 |
| |
| 引用本文： | 熊尚武,孟祥君.热带粗轧机组立轧非稳定轧制阶段变形规律的实验研究[J].塑性工程学报,1996,3(3):59-64. |
| |
| 作者姓名： | 熊尚武 孟祥君 |
| |
| 作者单位： | 东北大学，本溪钢铁公司 |
| |
| 摘 要： | 采用铅作为模拟材料，模拟比１∶１０，对热带粗轧机组平辊立轧时非稳定轧制阶段变形规律进行了模拟实验研究。分析和比较了头、尾部最大狗骨高度非稳定行为、失宽行为、鱼尾长度与立辊直径、侧压量、板坯来料厚度及宽度之间的关系，并建立了新的数学模型。
|
| 关 键 词： | 板坯立轧 非稳定变形 数学模型 |
EXPERIMENTS ON NON STEADY STATE EDGE ROLLING WITH FLAT ROLLS IN ROUGHING TRAINS OF HOT STRIP MILLS |
| |
| Xiong Shangwu,Zhu Xiangling,Liu Xianghua,Wang Guodong,Zhang Qiang.EXPERIMENTS ON NON STEADY STATE EDGE ROLLING WITH FLAT ROLLS IN ROUGHING TRAINS OF HOT STRIP MILLS[J].Journal of Plasticity Engineering,1996,3(3):59-64. |
| |
| Authors: | Xiong Shangwu Zhu Xiangling Liu Xianghua Wang Guodong Zhang Qiang |
| |
| Abstract: | Using 1/10 scale Pb, non steady deformation during edge rolling with flat rolls in roughing stands of hot strip mills has been simulated.The deformation behavior of the slab near the front and tail ends has been analysised and modelled with a new type as a function of initial slab thickness H 0 and initial slab width B 0, width reduction ΔE and edger roll diameter De. |
| |
| Keywords: | edge rolling non steady deformation model |
| 本文献已被 维普 等数据库收录！ |
