首页 | 本学科首页   官方微博 | 高级检索  
     

不锈钢放射性模拟样片在空气中的激光去污技术
引用本文:马梅花,高智星,汤秀章,郑佐西,朱欣研,张怡,刘雨昕. 不锈钢放射性模拟样片在空气中的激光去污技术[J]. 核化学与放射化学, 2017, 39(1): 69-71. DOI: 10.7538/hhx.2017.39.01.0069
作者姓名:马梅花  高智星  汤秀章  郑佐西  朱欣研  张怡  刘雨昕
作者单位:1.中国原子能科学研究院 放射化学研究所,北京102413;2.中国原子能科学研究院 核技术应用研究所,北京102413
摘    要:采用APEX放电型准分子激光器作为激光光源,用低放废液制备不锈钢放射性模拟样片,在激光去污装置上开展激光去污工艺参数的研究。通过考察不同的辐照强度、脉冲频率、辐照角度及扫描速率参数对不锈钢放射性模拟样片表面去污因子DF的影响,获得了激光去污工艺参数。在此参数下对模拟样片表面的去污因子大于200,剥离厚度小于20μm。

关 键 词:激光去污  放射性模拟样片  工艺参数  

Laser Decontamination Research on Radioactive Simulated Specimens in Air
MA Mei-hua,GAO Zhi-xing,TANG Xiu-zhang,ZHENG Zuo-xi,ZHU Xin-yan,ZHANG Yi,LIU Yu-xin. Laser Decontamination Research on Radioactive Simulated Specimens in Air[J]. Journal of Nuclear and Radiochemistry, 2017, 39(1): 69-71. DOI: 10.7538/hhx.2017.39.01.0069
Authors:MA Mei-hua  GAO Zhi-xing  TANG Xiu-zhang  ZHENG Zuo-xi  ZHU Xin-yan  ZHANG Yi  LIU Yu-xin
Affiliation:1.China Institute of Atomic Energy, P. O. Box 275(93), Beijing 102413, China;2.China Institute of Atomic Energy, P. O. Box 275(7), Beijing 102413, China
Abstract:The study on the laser decontamination parameters was carried on with the simulated radioactive specimens made by LLRW and using APEX laser.The efficiency of different laser parameters such as laser intensity,laser frequency,laser angle and laser scanning speed were investigated on the decontamination factor(DF),and then the optimized laser decontamination parameters were obtained.Using the optimized parameters,the laser decontamination was studied with the simulated stainless steel specimens by the laser decontamination equipment.The experimental results show that the DF is more than 200,and the peeling thickness on the stainless steel base is less than 20 μm.
Keywords:laser decontamination  radioactive simulated specimens  processing parameters
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《核化学与放射化学》浏览原始摘要信息
点击此处可从《核化学与放射化学》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号