| 基于CAE的弹药包装箱结构分析 |
| |
| 引用本文： | 秦舒浩,于杰,罗筑,陈兴江,刘一春. 基于CAE的弹药包装箱结构分析[J]. 包装工程, 2004, 25(3): 48-50 |
| |
| 作者姓名： | 秦舒浩 于杰 罗筑 陈兴江 刘一春 |
| |
| 作者单位： | 贵州工业大学,贵阳,550003;贵州省材料创新基地,贵阳,550003 |
| |
| 摘 要： | 针对产品在使用过程中出现的失效现象,利用CAE技术对包装箱产品的成型过程和静载承压过程进行了模拟,分析和研究了制品承压时的应力分布以及不同注塑浇口位置对注塑件在静载承压情况下所造成的可能失效的问题.研究结果表明,改变注塑成型工艺参数,浇口位置、个数可使注塑制品在静载承压时破裂的危险系数降低.
|
| 关 键 词： | CAE ANSYS MOLDFLOW 结构 优化 |
| 文章编号： | 1001-3563(2004)03-0048-03 |
| 修稿时间： | 2003-12-05 |
Analysis of Ammunition Packaging Case Based on CAE |
| |
| QIN Shu-hao,YU Jie,LUO Zhu,CHEN Xin-jiang,LIU Yi-chun. Analysis of Ammunition Packaging Case Based on CAE[J]. Packaging Engineering, 2004, 25(3): 48-50 |
| |
| Authors: | QIN Shu-hao YU Jie LUO Zhu CHEN Xin-jiang LIU Yi-chun |
| |
| Affiliation: | QIN Shu-hao~1,YU Jie~1,LUO Zhu~1,CHEN Xin-jiang2~,LIU Yi-chun~1 |
| |
| Abstract: | The pressing process and molding process was simulated with CAE technology. The stress distribution and the possible factors that cause breaking were analyzed when the product was subject load. It was proved that the possibilities of product's breaking can be reduced if the technical parameters changed, therefore the product's resistive performance to pressing, the quality and reliability can be improved. |
| |
| Keywords: | CAE ANSYS MOLDFLOW |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
