| 关于10MW高温气冷堆反应堆压力壳的水压试验研究 |
| |
| 引用本文： | 刘俊杰,张征明,何树延,王金海. 关于10MW高温气冷堆反应堆压力壳的水压试验研究[J]. 高技术通讯, 2000, 10(5): 87-90 |
| |
| 作者姓名： | 刘俊杰 张征明 何树延 王金海 |
| |
| 作者单位： | 清华大学核能技术设计研究院,北京,100084 |
| |
| 摘 要： | 对ＨＴＲ－１０反应堆压力壳进行了水压试验。用自行研制的液压张拉机对压力壳主螺栓实施了合理及有效的张拉，对压力壳进行了应变和变形测量，反应堆压力壳水压试验结果表明，压力过达到设计要求。
|
| 关 键 词： | 反应堆压力壳 水压试验 高温气冷堆 |
Study on the Hydraulic Pressure Test of HTR-10 Pressure Vessel |
| |
| Liu Junjie,Zhang Zhengming,He Shuyan,Wang Jinha. Study on the Hydraulic Pressure Test of HTR-10 Pressure Vessel[J]. High Technology Letters, 2000, 10(5): 87-90 |
| |
| Authors: | Liu Junjie Zhang Zhengming He Shuyan Wang Jinha |
| |
| Abstract: | The hydraulic pressure test of HTR 10 pressure vessel was successfully performed according to the requirement of the section NB 6200, ASME III code The test requirement, the test results and the test evaluations are described in detail The test tension was effectively and rationally done through an hydraulic tensionor, which was developed at INET The strain and deformation of the HTR 10 pressure vessel were also measured |
| |
| Keywords: | RPV Hydraulic pressure test Primary bolt tensioning HTR 10 |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
