首页 | 本学科首页   官方微博 | 高级检索  
     

碳氮共渗钢干摩擦状态下磨损行为的研究
引用本文:居毅,郭绍义. 碳氮共渗钢干摩擦状态下磨损行为的研究[J]. 浙江理工大学学报, 2001, 18(3): 150-153
作者姓名:居毅  郭绍义
作者单位:1. 浙江大学纳米材料与微结构实验室
2. 浙江工程学院机械与自动控制学院
摘    要:对20#钢试样进行C-N共渗热处理,经C-N共渗的试样进行干摩擦磨损试验,实验的载荷为2N到6N,滑动速度从8m/s到45m/s.摩擦磨损试验表明在滑动速度为35m/s左右时,发生了从轻微磨损向严重磨损的转变,结合SEM、AES和XPS分析,磨损率的变化与磨损表面的氧化物形成与剥落、氧化物的类型转变(Fe2O3转变成FeO)有密切关系.

关 键 词:碳钢  干磨损  表面分析
文章编号:1009-4741(2001)03-0150-04
修稿时间:2001-06-01

Study on Dry Sliding We ar Behaviors of Carbon-nitriding Layer o n 20# Steel
JU Yi,GUO Shao-yi. Study on Dry Sliding We ar Behaviors of Carbon-nitriding Layer o n 20# Steel[J]. Journal of Zhejiang Sci-tech University, 2001, 18(3): 150-153
Authors:JU Yi  GUO Shao-yi
Abstract:The dry sliding wear behaviors of carbon nitriding layer on AISI 1020 steel sliding against AISI 52100 steel under load from 2N to 6N and at sliding speed from 8m/s to 35m/s are investigated on wear tester developed in our laboratory.The morphologies of the worn surface and wear mechanism are observed and analyzed by means of scanning electron microscopy(SEM) and X-ray photoelectron spectroscopy(XPS).The profiles of the worn samples are also analyzed by Auger electron spectroscopy(AES).The results show that with increasing of sliding speed,the oxidized sheet could be transfered from Fe 2O 3 to FeO.
Keywords:Steel  Dry sliding  Surface analysis
本文献已被 CNKI 万方数据 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号