| 连续油管低周疲劳分析 |
| |
| 引用本文： | 高霞,肖国章. 连续油管低周疲劳分析[J]. 焊管, 2012, 35(4): 32-36 |
| |
| 作者姓名： | 高霞 肖国章 |
| |
| 作者单位： | 1. 宝鸡石油钢管有限责任公司钢管研究院,陕西宝鸡721008;国家石油天然气管材工程技术研究中心,陕西宝鸡721008
2. 宝鸡石油钢管有限责任公司宝鸡专用管公司,陕西宝鸡,721008 |
| |
| 摘 要： | 介绍了连续油管井下作业的弯曲循环方式及典型失效形式,并对连续油管作业进行了受力分析,同时采用外径38.1 mm,壁厚3.18 mm的CT80级进口连续油管进行不同内压下的疲劳试验。疲劳试验结果和失效试样的断口分析表明,内压作用下的弯曲疲劳是连续油管失效的主要原因,连续油管的疲劳失效属于典型的低周疲劳问题,疲劳裂纹都在连续油管外表面开始产生。因此,低周疲劳是连续油管工作寿命的主要影响因素。
|
| 关 键 词： | 连续油管 失效形式 低周疲劳 |
Analysis on Low Cycle Fatigue of Coiled Tubing(CT) |
| |
| GAO Xia , XIAO Guo-zhang. Analysis on Low Cycle Fatigue of Coiled Tubing(CT)[J]. Welded Pipe and Tube, 2012, 35(4): 32-36 |
| |
| Authors: | GAO Xia XIAO Guo-zhang |
| |
| Affiliation: | 1.Steel Pipe Research Institute of Baoji Petroleum Steel Pipe Co. ,Ltd. ,Baoji 721008, Shaanxi, China; 2.National Petroleum and Gas Tubular Goods Engineering Research Center ,Baoji 721008 ,Shaanxi, China 3.Baoji OCTG Company of BSG Group ,Baoji 721008 ,Shaanxi, China) |
| |
| Abstract: | In this article, the bending cycle mode and typical failure mode of CT downwhole operation were introduced, force analysis on CT operation was conducted,and the fatigue tests under different inside pressure on the imported CT80 Ф 38.1 mm×3.18 mm CT were earried out.The test results and the failure specimen fracture analysis showed that the bending fatigue under inside pressure is the main reason caused CT failure.CT failure belongs to typical low cycle fatigue,and fatigue crack occurred at outer surface of the coiled tubing. Therefore,low cycle fatigue is the main factor affecting CT working life. |
| |
| Keywords: | coiled tubing（CT） fatigue mode low cycle fatigue |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
