| 铸铁件铸造缺陷的有限元分析 |
| |
| 引用本文： | 张玉萍,钱灵. 铸铁件铸造缺陷的有限元分析[J]. 机械设计, 2006, 23(7): 25-26 |
| |
| 作者姓名： | 张玉萍 钱灵 |
| |
| 作者单位： | 1. 天津市机电工业科技信息研究所,天津,300091
2. 天津机电职业技术学院,天津,300131 |
| |
| 摘 要： | 采用有限元法建立了铸件凝固过程的数学模型，考虑材料随温度变化的非线性因素和相变中结晶潜热问题，对铸造凝固过程进行了数值模拟，得到了铸件在凝固过程的瞬态温度场、温度梯度场的分布和变化规律。预测出了铸件可能出现缩孔、缩松等铸造缺陷的位置，结果表明模拟预测与生产验证结果基本一致。
|
| 关 键 词： | 有限元法 铸造凝固过程 温度场 |
| 文章编号： | 1001-2354（2006）07-0025-02 |
| 收稿时间： | 2006-02-16 |
| 修稿时间： | 2006-02-162006-05-18 |
Finite element analysis on the founding drawback of castings |
| |
| ZHANG Yu-ping,QIAN Ling. Finite element analysis on the founding drawback of castings[J]. Journal of Machine Design, 2006, 23(7): 25-26 |
| |
| Authors: | ZHANG Yu-ping QIAN Ling |
| |
| Affiliation: | 1. Tianjin Institute of Science-Technological Information of Mechanical and Electronics Industry, Tianjin 300091 ,China; 2. Tianjin College of Mechatronic Vocational Technology, Tianjin 300131 ,China |
| |
| Abstract: | The mathematic model for solidification process of castings was established by the use of finite element method. Considering the problems of the non-linear factors of materials that vary along with temperature and the latent heat of crystallization in phase transformation, the numerical value simulation was carried out on the solidification process of founding and obtained the variation law of transient temperature field, distribution of gradient field of temperature in the solidification process of castings. Positions of founding defects that may appear in the castings such as shrinkage holes and porosities were pre-detected. It is shown that the result of simulative pre-detection is basically identical with the result of productive verification. |
| |
| Keywords: | finite element method solidification process of founding temperature field |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
