| 中板轧机板形控制性能的研究 |
| |
| 引用本文： | 孙林,张清东,陈先霖,王慧,邵建生,张翔,吴炳火,张华,周佩,俞智华.中板轧机板形控制性能的研究[J].钢铁,2002,37(1):34-38. |
| |
| 作者姓名： | 孙林 张清东 陈先霖 王慧 邵建生 张翔 吴炳火 张华 周佩 俞智华 |
| |
| 作者单位： | 1. 北京科技大学,北京,100083
2. 武汉钢铁(集团)公司 |
| |
| 摘 要： | 运用变厚度平面有限元方法建立了专门针对2800中板轧机的辊系变形（即凸度预测）仿真模型，并计算出辊形、钢板密度及轧制力等对钢板凸度的影响关系。仿真计算与实测值相一致，从而为中板轧机的板形控制系统的开发等提供必要的理论依据。
|
| 关 键 词： | 有限元分析 辊系变形 板形控制 中板轧机 |
Research on Profile and Flatness Control Characteristics of Plate Mill |
| |
| SUN Lin,ZHANG Qingdong,CHEN Xianlin,WANG Hui,SHAO Jiansheng.Research on Profile and Flatness Control Characteristics of Plate Mill[J].Iron & Steel,2002,37(1):34-38. |
| |
| Authors: | SUN Lin ZHANG Qingdong CHEN Xianlin WANG Hui SHAO Jiansheng |
| |
| Affiliation: | SUN Lin ZHANG Qingdong CHEN Xianlin WANG Hui SHAO Jiansheng (University of Science and Technology Beijing) ZHANG Xiang WU Binghuo ZHANG Hua ZHOU Pei YU Zhihua (Wuhan Iron and Steel(Group) Co ) |
| |
| Abstract: | By means of two dimensional finite element method with varying thickness, the simulation model for roll deformation or crown forecast on 2800 four high plate mill was specially established, and the influence of work roll contour, plate width and rolling force to plate crown was revealed Theresults of simulation calculation are basically close to the measured data Therefore the theoretical basis of controlling profile and flatness on plate mill is provided |
| |
| Keywords: | finite element methed plate roll system deformation profile and flatness |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
