| 火炮零部件变形量测量系统的设计与实现 |
| |
| 引用本文： | 任现君,单长胜,唐卫,高文汉,张国玉,王凌云,孙天祥,徐熙平. 火炮零部件变形量测量系统的设计与实现[J]. 长春理工大学学报(自然科学版), 2006, 29(2): 1-3 |
| |
| 作者姓名： | 任现君 单长胜 唐卫 高文汉 张国玉 王凌云 孙天祥 徐熙平 |
| |
| 作者单位： | 中国人民解放军63921部队,北京,100094;白城兵器试验中心,白城,137001;长春理工大学,光电工程学院,长春,130022 |
| |
| 基金项目： | 国防“十五”计划项目资助 |
| |
| 摘 要： | 针对火炮零部件变形量的测量问题,结合柔性三坐标机的测量原理,设计了基于柔性三坐标机的火炮零部件变形量测量系统。文中论述了系统的组成、总体结构、工作原理和变形量的测量方法,给出了坐标测量和蛙跳式坐标转换公式,对系统测量误差进行了分析,通过实验对测量系统的精度进行了验证,结果表明测量系统精度满足火炮零部件变形量的测量要求,测量方法切实可行。
|
| 关 键 词： | 火炮零部件 柔性三坐标测量系统 变形量 蛙跳球 |
| 文章编号： | 1672-9870（2006）02-0001-03 |
| 收稿时间： | 2006-03-10 |
| 修稿时间： | 2006-03-10 |
Design and Realization of Measuring System for Deformation Quantity of Artillery Components |
| |
| REN Xianjun,SHAN Changsheng,TANG Wei,GAO Wenhan,ZHANG Guoyu,WANG Lingyun,SUN Tianxiang,XU Xiping. Design and Realization of Measuring System for Deformation Quantity of Artillery Components[J]. Journal of Changchun University of Science and Technology, 2006, 29(2): 1-3 |
| |
| Authors: | REN Xianjun SHAN Changsheng TANG Wei GAO Wenhan ZHANG Guoyu WANG Lingyun SUN Tianxiang XU Xiping |
| |
| Abstract: | A system based on flexibility three coordinate machine for measuring the artillery components deformation quality was discussed detailedly in the paper,and the system composition,general construction,working principle and the deformable value measuring method were also put forward.It was present in this paper the above can derived the coordinate measuring formula and leap-frog coordinate transforming formula.The experimental results based on error analysis and precision calculation showed that the measuring system can satisfy the shooting range demand for artillery components deformation quantity. |
| |
| Keywords: | artillery components measuring system of flexibility three coordinates deformation quantity leap-frog ball |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
