| 外啮合链轮齿形设计 |
| |
| 引用本文： | 单宝忠 吴登峤. 外啮合链轮齿形设计[J]. 机械传动, 1996, 20(2): 1-4,8 |
| |
| 作者姓名： | 单宝忠 吴登峤 |
| |
| 作者单位： | 吉林工业大学 |
| |
| 基金项目： | 国家自然科学基金资助项目 |
| |
| 摘 要： | 本文阐述了链轮处在外啮合工况时齿形的设计方法，即外啮合链轮齿槽形状廓线及其方程；链轮外啮合时重合度的计算及提高重合度的措施。通过实例具体介绍了外啮合链轮齿形的设计过程
|
| 关 键 词： | 链轮 齿形 外啮合 |
Tooth Form Design of Exetrnal Engagement Sprocket |
| |
| Shan Baozhong,et al.. Tooth Form Design of Exetrnal Engagement Sprocket[J]. Journal of Mechanical Transmission, 1996, 20(2): 1-4,8 |
| |
| Authors: | Shan Baozhong et al. |
| |
| Abstract: | The paper expounds the design method of tooth form when sprocket is at the condition of external enganement.The content involves the profile and its equation of externl engagement sprocket;the calcualation of coincidnce coefficient and the measures of improving it.And through a living example,the paper introduce the design process of tooth form of external engagemant sprocket concreterly. |
| |
| Keywords: | Sprocket Tooth Form External Engagement |
| 本文献已被 CNKI 维普 等数据库收录！ |
