| 微碳钢热轧温度参数的实验室研究 |
| |
| 引用本文： | 张开华,常军,李军.微碳钢热轧温度参数的实验室研究[J].钢铁钒钛,2002,23(1):12-16. |
| |
| 作者姓名： | 张开华 常军 李军 |
| |
| 作者单位： | 攀枝花钢铁研究院,四川,攀枝花,617000 |
| |
| 摘 要： | 针对微碳钢的特点,在实验室进行了模拟实验,在“三高一低”的原则下,研究了微碳钢加热温度对AlN溶解的影响,终轧温度及冷却速度对热轧晶粒度的影响,卷取温度对AlN和渗碳体析出的影响。提出了生产微碳钢的热轧温度参数,为大生产制定工艺制度提供了理论依据。
|
| 关 键 词： | 深冲钢 微碳钢 终轧温度 卷取温度 |
| 文章编号： | 1004-7638(2002)01-0012-05 |
| 修稿时间： | 2001年11月22 |
STUDY OF HOT ROLLING TEMPERATURE PARAMETERS FOR MICRO-CARBON STEEL IN LABORATORY |
| |
| ZHANG Kai-hua,CHANG Jun,LI Jun.STUDY OF HOT ROLLING TEMPERATURE PARAMETERS FOR MICRO-CARBON STEEL IN LABORATORY[J].Iron Steel Vanadium Titanium,2002,23(1):12-16. |
| |
| Authors: | ZHANG Kai-hua CHANG Jun LI Jun |
| |
| Abstract: | According to the characteristics of micro-carbon steel,simulative test was taken in laboratory under the principle of "high heating temperature,high beginning rolling temperature,high final rolling temperature and low rolling temperature".The effects of heating temperature on the AlN solubility,final rolling temperature on the grain size,coiling temperature on the AlN and cementite carbide precipitation,cooling rate on the grain size were conducted.The hot rolling temperature parameters of micro-carbon steel in laboratory were put forward. |
| |
| Keywords: | deep-drawing steel micro-carbon steel final rolling temperature rolling temperature |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
