Fabrication of transparent silica glass by powder sintering |
| |
Authors: | O Yong-Taeg Shigeru Fujino Kenji Morinaga |
| |
Affiliation: | a Graduate School of Engineering Sciences, Kyushu University, 6-1 Kasugakouen, Kasuga-shi, Fukuoka 816-8580, Japan;b Department of Applied Science of Electronics and Materials, Graduate School of Engineering Sciences, Kyushu University, 6-1 Kasugakouen, Kasuga-shi, Fukuoka 816-8580, Japan |
| |
Abstract: | Transparent silica glasses were obtained by sintering a green compact (fabricated by slip-casting methods for high-purity silica glass powder) in diverse atmospheres. The relationships between sintering atmosphere and sintering temperature that result in transparent, sintered silica glass were shown. The results indicate that there are four forming phases for each sintering atmosphere and temperature: (1) nontransparent glass resulting from an overabundance of pores (2) crystal, such as cristobalite or β-quartz, (3) moganite, and (4) transparent glass. Optimum sintering temperature for fabricating transparent silica glass was above 1673 K in a high-vacuum (10−4 Pa: p(O2)=10−14) atmosphere. We investigate the fabrication of transparent and hydroxyl-free silica glass by a powder-sintered method. After studying the effect of sintering schedule on residual OH−] concentration for transparent, sintered silica glasses, we sintered a green compact prepared by silica powders with a mean particle size of 1.6 μm, first heating it to 1523 K for dehydration and then to 1873 K for densification. This typical fabricated condition resulted in a transparent, sintered silica glass with <1 ppm OH−] concentration. |
| |
Keywords: | Silica Powder sintering Crystallization Transparency |
本文献已被 ScienceDirect 等数据库收录! |
|