| 点接触齿面啮合分析的基本公式及其应用研究 |
| |
| 引用本文： | 吴训成,毛世民,吴序堂. 点接触齿面啮合分析的基本公式及其应用研究[J]. 机械设计, 2000, 17(2): 15-18 |
| |
| 作者姓名： | 吴训成 毛世民 吴序堂 |
| |
| 作者单位： | 西安交通大学,陕西,西安,710049 |
| |
| 基金项目： | 国家自然科学基金资助项目! ( 5 9775 0 0 9) |
| |
| 摘 要： | 建立了一个包含四个安装参数和一个转角参数在内的点接触齿面副啮析的数学模型，并导出了一组基本公式。这些公式适用于齿面啮哈的任何接触点。利用这些公式一方面能够计算分析已知点接触齿面副的啮合性能，而且比用ＴＣＡ要方便快速得多，另一方面也能够根据对啮合性能的要求设计点接触齿面副。
|
| 关 键 词： | 齿面接触 啮合分析 齿面设计 点接触 |
A study on the fundamental formulae for the meshing a analysis of point-contact tooth surfaces and their application |
| |
| Wu Xuncheng. A study on the fundamental formulae for the meshing a analysis of point-contact tooth surfaces and their application[J]. Journal of Machine Design, 2000, 17(2): 15-18 |
| |
| Authors: | Wu Xuncheng |
| |
| Affiliation: | Xi'an Jiaotong University |
| |
| Abstract: | This paper established a mathematical model for the meshing analysis of point contact tooth surfaces pairs,which includes four mounting parameters and one rational angle parameter,and derived a set of fundamental formulae.These formulae are suitable for any contacting point of tooth surface meshing.By the use of these formulae ,for one thing,the meshing function of contacting tooth surface pairs of known points can be computed and analyzed,which is much more conveniext and quicker than the TCA,and for another,the point contact tooth surface pairs can also be designed according to the requirements on the gearing performance. |
| |
| Keywords: | |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
