| FANUC数控系统的MasterCAM后置处理程序浅析 |
| |
| 引用本文： | 杨文明.FANUC数控系统的MasterCAM后置处理程序浅析[J].模具工业,2007,33(10):65-68. |
| |
| 作者姓名： | 杨文明 |
| |
| 作者单位： | 深圳职业技术学院,广东,深圳,518055 |
| |
| 摘 要： | 根据数控机床自动编程加工技术的NCI文件和NC程序的关系,分析和归纳了MasterCAM后置处理程序的ASCII惯用档和变数,并举例进行了说明,对MasterCAM后置处理程序的二次开发和FANUC数控系列的.PST文件的编辑修改和重新设定有一定的帮助。
|
| 关 键 词： | 后置处理程序 惯用档 变数 |
| 文章编号： | 1001-2168（2007）10-0065-04 |
| 修稿时间： | 2007-05-16 |
Introduction of MasterCAM post processing program based on FANUC numerical control system |
| |
| YANG Wen-ming.Introduction of MasterCAM post processing program based on FANUC numerical control system[J].Die & Mould Industry,2007,33(10):65-68. |
| |
| Authors: | YANG Wen-ming |
| |
| Affiliation: | Shenzhen Polytechnic, Shenzhen, Guangdong 518055, China |
| |
| Abstract: | The ASCII idiomatic archives and variables in the post-processing program of MasterCAM were analyzed and summarized according to the relationship between NCI files and NC programs both included in automatic programming and manufacturing technology of NC machine tools.An example of application was presented,which will be references to the secondary development of MasterCAM post-processing program and the edit update and reset of.PST files in FANUC NC series. |
| |
| Keywords: | post-processing program idiomatic archives variable |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
