| 一种数控铣床刀具位姿参数的标定方法 |
| |
| 引用本文： | 王瑞,王知行,钟诗胜.一种数控铣床刀具位姿参数的标定方法[J].机械设计,2007,24(5):52-54. |
| |
| 作者姓名： | 王瑞 王知行 钟诗胜 |
| |
| 作者单位： | 哈尔滨工业大学,机电工程学院,黑龙江,哈尔滨,150001;哈尔滨工业大学,机电工程学院,黑龙江,哈尔滨,150001;哈尔滨工业大学,机电工程学院,黑龙江,哈尔滨,150001 |
| |
| 摘 要： | 在传统立式铣床的基础上进行数控改造,配置了6自由度工作台,形成一种新型的多功能数控铣床.简要介绍了该型铣床的结构,详细介绍了刀具相对于基座坐标系的位姿参数的标定方法,对铣床加工精度的提高有着重要意义.
|
| 关 键 词： | 数控铣床 并联机床 参数标定 |
| 文章编号： | 1001-2354（2007）05-0052-03 |
| 修稿时间： | 2006-10-052007-01-16 |
Calibration method on the posture parameters of a kind of cutter of numerically controlled milling machine |
| |
| WANG Rui,WANG Zhi-xing,ZHONG Shi-sheng.Calibration method on the posture parameters of a kind of cutter of numerically controlled milling machine[J].Journal of Machine Design,2007,24(5):52-54. |
| |
| Authors: | WANG Rui WANG Zhi-xing ZHONG Shi-sheng |
| |
| Affiliation: | School of Electro-Mechanical Engineering, Harbin Polytechnic University, Harbin 150001, China |
| |
| Abstract: | A numerical control transformation has been carried out on the basis of the traditional milling machine.A worktable with 6 degree of freedom was configured to form a novel multi-functioned numerically controlled milling machine.This paper introduced briefly the structure of this typed milling machine,and the calibration method for the posture parameters of cutter relative to coordinate system of pedestal was recommended in detail,which possesses important significance for enhancing the processing accuracy of milling machine. |
| |
| Keywords: | numerically controlled milling machine parallel machine tools parametric calibration |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
