首页 | 本学科首页   官方微博 | 高级检索  
     

限定几何构型茂金属催化剂催化乙烯/1-己烯共聚研究
引用本文:王立娟,王华,王文燕,王焱鹏.限定几何构型茂金属催化剂催化乙烯/1-己烯共聚研究[J].工业催化,2017,25(3):66-70.
作者姓名:王立娟  王华  王文燕  王焱鹏
作者单位:1.中国石油天然气股份有限公司石油化工研究院大庆化工研究中心,黑龙江 大庆 163714;2.大庆石化公司化工一厂,黑龙江 大庆 163714
摘    要:以自制的限定几何构型茂金属催化剂为主催化剂,甲基铝氧烷为助催化剂,对乙烯/1-己烯共聚性能进行研究,考察溶剂、Al与Zr物质的量比、聚合温度、聚合压力和共聚单体浓度等工艺条件对催化剂活性以及聚合物性能的影响。确定乙烯/1-己烯共聚合的工艺条件为:以正庚烷为溶剂,Al与Zr物质的量比为700~1 000,聚合温度(100~120)℃,聚合压力(1.2~2.0)MPa,优选1-己烯浓度为(0.8~1.8)mol·L~(-1)。

关 键 词:有机化学工程  限定几何构型茂金属催化剂  共聚  乙烯  1-己烯  

Study of ethylene/1-hexene copolymerization catalyzed by limited geometry metallocene catalyst
Wang Lijuan,Wang Hua,Wang Wenyan,Wang Yanpeng.Study of ethylene/1-hexene copolymerization catalyzed by limited geometry metallocene catalyst[J].Industrial Catalysis,2017,25(3):66-70.
Authors:Wang Lijuan  Wang Hua  Wang Wenyan  Wang Yanpeng
Affiliation:1.Daqing Chemical Research Center of Petrochemical Research Institute,PetraChina,Daqing 163714,Heilongjiang China; 2.No.1 Chemical Plant,Daqing Petrochemical Company,Daqing 163714,Heilongjiang,China
Abstract:Using methylaluminoxane as the cocatalyst,ethylene/1-hexene copolymerization catalyzed by the self-made limited geometry metallocene catalyst was studied.The effects of solvents,Al/Zr molar ratios,polymerization temperatures,polymerization pressure and comonomer concentrations on the catalyst activity and polymer properties were investigated.The process condition for the copolymerization of 1-hexene with ethylene catalyzed by limited geometry metallocene catalyst was determined as follows:n-heptane as the solvent,Al/Zr molar ratio 700-1 000,polymerization temperature (100-120) ℃, polymerization pressure (1.2-2.0) MPa and 1-hexene optimal concentration (0.8-1.8) mol·L-1.
Keywords:organic chemical engineering  limited geometry metallocene catalyst  copolymerization  ethylene  1-hexene  
本文献已被 CNKI 等数据库收录!
点击此处可从《工业催化》浏览原始摘要信息
点击此处可从《工业催化》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号