One-pot terpolymerization of CO2, cyclohexene oxide and maleic anhydride using a highly active heterogeneous double metal cyanide complex catalyst

This paper describes a convenient one-pot terpolymerization of CO₂, cyclohexene oxide (CHO) and maleic anhydride (MAH) to afford a poly (ester-carbonate) with a low content of ether units (2.9-4.3 mol%) using a highly active Zn-Co(III) double metal cyanide complex (DMCC) catalyst. Terpolymerization was carried out in tetrahydrofuran (THF) at 75-90 °C and 1.0-4.0 MPa and no cyclic carbonate was observed in NMR spectra. The number-average molecular weight (M_n) of the terpolymer was up to 14.1 kg/mol with a narrow molecular weight distribution of 1.4-1.7. The apparent efficiency of the catalyst was up to 12.7 kg polymer/g Zn, representing the highest catalytic activity for terpolymerization of CO₂, epoxides and cyclic anhydrides to date. THF dramatically inhibited polyether formation in this terpolymerization owing to its nucleophilicity towards the Zn²⁺ center of Zn-Co (III) DMCC. This presents the first example of solvent-assisted selectivity for inhibiting ether units in CO₂ polymerization catalyzed by a heterogeneous system. Kinetic analyses of MAH/CHO/CO₂ terpolymerization (MAH/CHO 0.2) suggested that polyester production was slightly faster than polycarbonate production in the early stage. A mechanism for this terpolymerization catalyzed by Zn-Co (III) DMCC catalyst was proposed. Moreover, addition of small amounts of MAH (MAH/CHO molar ratio ≤0.2) during CO₂/CHO copolymerization can improve the thermal properties of the resultant terpolymers.