| 超宽带声表面波滤波器的设计 |
| |
| 引用本文： | 陈景,韩韬,吉小军,唐供宾,张巧珍. 超宽带声表面波滤波器的设计[J]. 压电与声光, 2016, 38(3): 353-355 |
| |
| 作者姓名： | 陈景 韩韬 吉小军 唐供宾 张巧珍 |
| |
| 作者单位： | (上海交通大学 仪器科学与工程系，上海 200240) |
| |
| 基金项目： | 国家自然科学基金资助项目(11404209);上海自然科学基金资助项目(14ZR1422000);高等学校博士学科点专项科研基金资助项目(20130073120039)；教育部留学回国人员启动基金资助项目(教外司留【2014】1685号) |
| |
| 摘 要： | 该文精确模拟了基于弛豫铁电单晶的声表面波(SAW)梯形滤波器的性能。首先介绍了由谐振器构成的梯形SAW滤波器的工作原理,利用QUCS软件建立了七阶梯形滤波器的仿真模型。结果表明,该单晶能实现高达620 MHz的超宽带SAW滤波器(中心频率1GHz),比传统压电材料的滤波器带宽高3倍;通过优化各支路谐振器的静态电容及传统梯型滤波器的结构,牺牲了一定的带宽,但获得了较高的带外抑制和过渡带的陡峭度;讨论了不同品质因数对滤波器带内插损的影响。
|
| 关 键 词： | 超宽带滤波器 声表面波(SAW) 弛豫铁电单晶 机电耦合系数 品质因数 |
Design of Ultra Wideband Surface Acoustic Wave Filters |
| |
| CHEN Jing,HAN Tao,JI Xiaojun,TANG Gongbin and ZHANG Qiaozhen. Design of Ultra Wideband Surface Acoustic Wave Filters[J]. Piezoelectrics & Acoustooptics, 2016, 38(3): 353-355 |
| |
| Authors: | CHEN Jing HAN Tao JI Xiaojun TANG Gongbin ZHANG Qiaozhen |
| |
| Abstract: | This paper accurately simulated the properties of ladder type surface acoustic wave (SAW) filters composed of resonators employing relaxor based ferroelectric single crystals. Firstly, the working principles of ladder type SAW filter was introduced, and then a simulation model of seven stepped filter was established by utilizing the quite universal simulator (QUCS). The simulated results showed that an extremely large wideband SAW filter of 620 MHz at 1 GHz could be obtained by utilizing such new single crystals, which is presently three times larger than that of the conventional piezoelectric material; the band rejection and skirt steepness could be improved by adjusting static capacitance ratio and modification of the conventional ladder type filter, but sacrifices some bandwidth; the influence of qullity factor on the insertion loss of SAW filters was discussed finally. |
| |
| Keywords: | ultra wideband filter surface acoustic wave relaxor based ferroelectricl single crystals coupling factor quality factor |
|
| 点击此处可从《压电与声光》浏览原始摘要信息 |
|
点击此处可从《压电与声光》下载免费的PDF全文 |
