| 工业CT双通道高速数据传输系统设计 |
| |
| 引用本文： | 安鹏,龚光华,宋加涛,薛涛.工业CT双通道高速数据传输系统设计[J].核电子学与探测技术,2011,31(6):680-684. |
| |
| 作者姓名： | 安鹏 龚光华 宋加涛 薛涛 |
| |
| 作者单位： | 1. 宁波工程学院电子与信息工程学院,宁波,315016
2. 清华大学工程物理系,北京,100084 |
| |
| 基金项目： | 国家自然科学基金资助项目 |
| |
| 摘 要： | 基于千兆以太网和PCI - EXPRESS两种总线协议设计出了一套工业CT双通道数据传输系统.系统接收数据采集模块发送的数字电信号,分别通过千兆以太网和PCI - EXPRESS发送至外部网络或工控机中,两种协议之间也可以相互通讯,提高系统利用率.针对现有同类系统集成度不高的现状,设计方案采用SOPC技术中的IP硬核和...
|
| 关 键 词： | 工业CT 高速传输 千兆以太网 PCI-Express |
Dual- channel High- speed Data Transmission System of Industrial CT |
| |
| AN Peng,GONG Guang-hua,SONG Jia-tao,XUE Tao.Dual- channel High- speed Data Transmission System of Industrial CT[J].Nuclear Electronics & Detection Technology,2011,31(6):680-684. |
| |
| Authors: | AN Peng GONG Guang-hua SONG Jia-tao XUE Tao |
| |
| Affiliation: | AN Peng1,GONG Guang-hua2,SONG Jia-tao1,XUE Tao2(1.College of Electronics and Information Engineering,Ningbo University of Technology,Ningbo 315016,China,2.The department of Engineering Physics,Tsinghua University,Beijing 100084,China) |
| |
| Abstract: | Based on Gigabit Ethernet and PCI-EXPRESS two kinds of bus protocol,dual-channel industrial CT data transmission system is designed.Digital signals from data acquisition module are respectively sent to an external network or IPC through Gigabit Ethernet and PCI-EXPRESS.The two protocols can communicate with each other between the increase system utilization.For existing similar systems integration is not high status,designs using SOPC technology in the soft IP core and hard IP core co-design,making the whol... |
| |
| Keywords: | industrial CT high-speed transmission gigabyte Ethernet PCI-Express |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
