| 钎焊保温时间对GH738与GH4169镍基合金真空钎焊接头组织性能的影响 |
| |
| 引用本文： | 石昆,于治水,李军,李瑞峰.钎焊保温时间对GH738与GH4169镍基合金真空钎焊接头组织性能的影响[J].热加工工艺,2010,39(1). |
| |
| 作者姓名： | 石昆 于治水 李军 李瑞峰 |
| |
| 作者单位： | 1. 上海工程技术大学,材料工程学院,上海,201620
2. 华东船舶工业学院,材料科学与工程学院,江苏,镇江,212003 |
| |
| 基金项目： | 国家自然科学基金，上海市科委攻关项目，上海市教委重点学科资助项目 |
| |
| 摘 要： | 用镍基钎料钎焊镍基合金时钎焊保温时间对钎缝易产生金属间化合物、晶界渗入脆化现象有重要影响,因此采用5、15和45min三种钎焊保温时间对镍基合金进行真空钎焊试验,通过光学显微镜、扫描电镜、X射线能谱仪及硬度计等研究了三种钎焊保温时间下钎焊接头微观组织、成分及显微硬度分布等内容。结果表明,随着钎焊保温时间的延长,接头钎料与母材之间的元素扩散越充分,当钎焊保温时间为45min时,接头组织大部分为固溶体。
|
| 关 键 词： | 镍基合金 真空钎焊 镍基钎料 钎焊保温时间 |
Effect of Brazing Holding Time on Microstructure and Property of GH738 /GH4169 Vacuum Brazing Joint |
| |
| SHI Kun,YU Zhishui,LI Jun,LI Ruifeng.Effect of Brazing Holding Time on Microstructure and Property of GH738 /GH4169 Vacuum Brazing Joint[J].Hot Working Technology,2010,39(1). |
| |
| Authors: | SHI Kun YU Zhishui LI Jun LI Ruifeng |
| |
| Affiliation: | SHI Kun1,YU Zhishui1,LI Jun1,LI Ruifeng2(1.Department of Materials Engineering,Shanghai University of Engineering Science,Shanghai 201620,China,2.Department of Materials Science , Engineering,East China Shipbuilding Institute,Zhenjiang 212003,China) |
| |
| Abstract: | The effects of brazing holding time on inconel superalloy vacuum brazing were evaluated.Brazing holding time was crucial to intermetallic compounds formation and grain boundary brittle phenomenon in the inconel superalloy brazing by using nickel based filler.Microstructure of the joints brazed,element distribution and microhardness was evaluated at brazing holding for 5 min,15 min and 45 min by optical microscope,scanning electron microscope,energy dispersive X-ray spectroscopy and microhardness meter.The r... |
| |
| Keywords: | inconel superalloy vacuum brazing nickel based filler brazing holding time |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
