| 按齿轮刚度理论进行齿廓修形及其加工方法 |
| |
| 引用本文： | 辛经纬.按齿轮刚度理论进行齿廓修形及其加工方法[J].上海工程技术大学学报,2009,23(1):24-27. |
| |
| 作者姓名： | 辛经纬 |
| |
| 作者单位： | 东华大学,机械工程学院,上海,201620 |
| |
| 摘 要： | 通过分析一对啮合齿轮的综合刚度变化,提出齿廓最大修形量的计算方法,并确定修形曲线方程及修形长度.利用ANSYS软件对修形后的齿轮进行有限元接触分析,验证了齿廓修形可以有效减小齿面载荷冲击.最后提出了修形齿轮的批量加工方法.
|
| 关 键 词： | 综合刚度 齿形修形 有限元分析 |
Research on Gear Profile Modification and Processing Based on Rigidity Theory |
| |
| XIN Jing-wei.Research on Gear Profile Modification and Processing Based on Rigidity Theory[J].Journal of Shanghai University of Engineering Science,2009,23(1):24-27. |
| |
| Authors: | XIN Jing-wei |
| |
| Affiliation: | College of Mechanical Engineering;Donghua University;Shanghai 201620;China |
| |
| Abstract: | The profile modification analyzed from the rigidity of the teeth and the gear's processing method was researched.The method was raised to calculate maximal amount of the profile modification through the analysis of a pair of teeth's rigidity.The modification curve equation and length were also raised.Through the finite element analysis with ANSYS,it was verified that the modification can reduce the impact of the load.Finally,the method of how to process the modification gear in mass production was put forwa... |
| |
| Keywords: | general rigidity profile modification FEA（Finite Element Analysis） |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
| 点击此处可从《上海工程技术大学学报》浏览原始摘要信息 |
|
点击此处可从《上海工程技术大学学报》下载全文 |
