| 灯座插口组件级进模设计 |
| |
| 引用本文： | 姜伯军. 灯座插口组件级进模设计[J]. 模具制造, 2009, 9(5): 19-22 |
| |
| 作者姓名： | 姜伯军 |
| |
| 作者单位： | 常州明顺电器有限公司,江苏常州,213015 |
| |
| 摘 要： | 针对灯座插口组件结构特点进行了工艺分析，确定冲件级进模排样方案，介绍了模具主要冲压工序及模具成形结构设计。
|
| 关 键 词： | 工艺分析 排样图 滑块成形 级进模设计 |
Design of Progressive Die for the Lampstand Socket Component |
| |
| Jiang Bojun. Design of Progressive Die for the Lampstand Socket Component[J]. Die & Mould Manufacture, 2009, 9(5): 19-22 |
| |
| Authors: | Jiang Bojun |
| |
| Abstract: | According the structure characteristic of the lampstand socket component,thef orming process was analyzed,determined the progressive die strip layout,and introduced mains tamping process and die structure design. |
| |
| Keywords: | process analysis strip layout forming by sliding block progressive die design |
| 本文献已被 CNKI 维普 万方数据 等数据库收录！ |
|
