| 基于B样条曲线的充氮加塞包装机凸轮曲线设计 |
| |
| 引用本文： | 徐锋,徐坚,贺炜.基于B样条曲线的充氮加塞包装机凸轮曲线设计[J].包装工程,2010,31(21). |
| |
| 作者姓名： | 徐锋 徐坚 贺炜 |
| |
| 作者单位： | 南京工业职业技术学院,南京,210046;南京工业职业技术学院,南京,210046;南京工业职业技术学院,南京,210046 |
| |
| 基金项目： | 江苏省精密制造金工程技术研究开发中心开放基项目(ZK09-01-07); 南京工业职业技术学院科研基金项目(YK10-01-02) |
| |
| 摘 要： | 根据通常采用的凸轮曲线设计方法是根据从动件运动关系进行分段表述,不能从整体上对凸轮特性进行控制的情况,采用样条曲线函数表示从动件运动关系,并将其应用在充氮加塞包装机凸轮设计中。实现了充氮加塞包装机凸轮曲线的连续性设计,为其它包装机凸轮设计提供了参考。
|
| 关 键 词： | 平面凸轮 设计 B样条 充氮加塞包装机 |
Design of Cam Curve for Evacuating and Stopper Inserting Machine Based on B-spline Curve |
| |
| XU Feng,XU Jian,HE Wei.Design of Cam Curve for Evacuating and Stopper Inserting Machine Based on B-spline Curve[J].Packaging Engineering,2010,31(21). |
| |
| Authors: | XU Feng XU Jian HE Wei |
| |
| Affiliation: | XU Feng,XU Jian,HE Wei(Nanjing Institute of Industrial Technology,Nanjing 210046,China) |
| |
| Abstract: | The commonly adopted cam curve design method is segmented expression according to the movement relation of cam follower,and it could not control the characteristics of cam as a whole,the authors adopts spline curve function to represent the movement relation of cam follower,and apply it in the cam design of evacuating and stopper inserting machine.Continuous design of cam curve for evacuating and stopper inserting machine is achieved,and it is a good reference for the cam design of other packaging machines. |
| |
| Keywords: | planar cam curve design B-spline curve evacuating and stopper inserting machine |
| 本文献已被 CNKI 万方数据 等数据库收录！ |
|
