首页 | 本学科首页   官方微博 | 高级检索  
     

往复振动筛板萃取塔放的大设计模型
引用本文:吕建华,刘继东,张文林,李春利,李柏春. 往复振动筛板萃取塔放的大设计模型[J]. 化工学报, 2006, 57(10): 2508-2514
作者姓名:吕建华  刘继东  张文林  李春利  李柏春
作者单位:河北工业大学化工学院,天津 300130
摘    要:对往复振动筛板萃取塔(RPEC)塔内的传质过程进行了理论分析,并在此基础上,从单液滴传质模型出发,应用数学统计方法建立了RPEC放大设计模型,即进行放大设计时应遵循通量、塔板间距、振幅和频率不变的原则计算表观传质单元高度HOXP.采用林可霉素-正丁醇-酸水物系对塔径100 mm的RPEC实验塔研究表明:真实传质单元高度HOX与体系物性、表观速度、输入能量(振幅A×频率f)有关,而与塔径无关,且不受轴向混合的影响,模型较好地预测了HOX随输入能量的增加而减小,而通量的变化则对其影响较小;分散传质单元高度HOXD是塔径D、输入能量、通量Us和体系物性的函数,实验结果表明模型较好地描述了输入能量和通量增加强化传质起主导作用,有效降低分散传质单元高度HOXD的传质过程部分,而不能描述轴向混合起主导作用部分.应用放大设计模型对直径325 mm的RPEC放大设计结果验证模型的预测误差在20%以内.

关 键 词:往复振动板式萃取塔  放大模型  传质系数  传质单元高度
文章编号:0438-1157(2006)10-2508-07
收稿时间:2005-12-15
修稿时间:2005-12-152006-06-02

Scale-up model of reciprocating sieve plate extraction column
L Jianhua,LIU Jidong,ZHANG Wenlin,LI Chunli,LI Baichun. Scale-up model of reciprocating sieve plate extraction column[J]. Journal of Chemical Industry and Engineering(China), 2006, 57(10): 2508-2514
Authors:L Jianhua  LIU Jidong  ZHANG Wenlin  LI Chunli  LI Baichun
Affiliation:L(U) Jianhua,LIU Jidong,ZHANG Wenlin,LI Chunli,LI Baichun
Abstract:The mass transfer process in the reciprocating sieve plate extraction column(RPEC)was studied.Based on the single droplet mass transfer model,the scale-up model of RPEC was established with mathematical statistics.In this model,flux,tray spacing,amplitude and frequency should be kept invariable when HOXP(apparent height of a transfer unit)was calculated.In a RPEC of diameter 100 mm,the experiment was carried out with lincomycin-n-butanol-acid water.The experiment results showed that:HOX(true height of a transfer unit)was related to system physical properties,apparent velocity,input energy(amplitude A×frequency f),but had nothing to do with the column diameter and axial mixing.The model caculation showed that HOX decreased with the increase of input energy but was little affected by the change in flux.HOXD(dispersion height of a transfer unit)is a function of column diameter D,input energy,flux Us and system physical properties.The mass transfer in RPEC could be divided into two stages.The model could describe the first stage better,in which the increase of input energy and flux intensifies the mass transfer and reduces HOXD effectively.But it could not describe the second stage,in which the influence of axial mixing on mass transfer dominates.The scale-up model was used to design a RPEC of diameter 325 mm, and the results showed that the prediction error of this model was less than 20%.
Keywords:reciprocating sieve plate extraction column   scale-up model   coefficient of mass transfer  height of transfer unit
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《化工学报》浏览原始摘要信息
点击此处可从《化工学报》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号