首页 | 本学科首页   官方微博 | 高级检索  
     

基于Goupillaud模型的钻柱波数值模拟和信号分析方法
引用本文:吴何珍,葛洪魁,崔士波,韩来聚,魏茂安. 基于Goupillaud模型的钻柱波数值模拟和信号分析方法[J]. 石油物探, 2010, 49(6). DOI: 10.3969/j.issn.1000-1441.2010.06.003
作者姓名:吴何珍  葛洪魁  崔士波  韩来聚  魏茂安
作者单位:1. 中国地震局地球物理研究所,北京,100081
2. 中国石油化工股份有限公司石油勘探开发研究院,北京,100083
3. 中国石油化工集团公司胜利石油管理局钻井工艺研究院,山东东营,257017
基金项目:国家高技术研究发展计划(863)项目,中国地震局地球物理研究所中央级公益性科研院所基本科研业务专项
摘    要:基于传递矩阵可以用一系列反射系数来表示整个钻柱,而钻柱顶端接收的钻柱波信号含有与这些反射系数相关的信息。基于钻柱模拟实验数据,利用盲源反褶积进行反射系数计算,将截取的输入子波与反射系数褶积,得到了模拟输出信号。结果表明,模拟输出信号与实际采集的信号相关度较高。运用该方法对随钻地震参考信号进行了处理,达到了强化钻头源信号的目的。

关 键 词:钻柱波
收稿时间:2010-09-02
修稿时间:2010-10-19

Numerical simulation and signal analysis of the drillstring wave based on Goupillaud model
Wu Hezhen,Ge Hongkui,Cui Shibo,Han Laiju,Wei Mao'an. Numerical simulation and signal analysis of the drillstring wave based on Goupillaud model[J]. Geophysical Prospecting For Petroleum, 2010, 49(6). DOI: 10.3969/j.issn.1000-1441.2010.06.003
Authors:Wu Hezhen  Ge Hongkui  Cui Shibo  Han Laiju  Wei Mao'an
Affiliation:Institute of Geophysics,China Earthquake Administration,Beijing 100081,China
Abstract:Based on transfer matrix,the whole drillstring can be expressed by reflection coefficients.The drillstring wave signals measured at the drillstring top contains the information related to the reflection coefficients.Based on the drillstring simulated experimental data,the reflection coefficients was calculated by using blind deconvolution.We got simulated output signal by the convolution of intercepted input wavelet and reflection coefficient.The result shows that the correlation of the simulated signal and the actual signal is very high.The method was used to process seismic while-drilling reference signals,and the source signals were strengthened.
Keywords:drillstring wave  transfer matrix method  Goupillaud model  blind deconvolution
本文献已被 CNKI 万方数据 等数据库收录!
点击此处可从《石油物探》浏览原始摘要信息
点击此处可从《石油物探》下载全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号