Analysis of unavoidable geometric errors in the side wall of end-milled parts for corner surface

The location and the size of a geometrically defected region in the side wall of a corner, which is generated during the flat end-milling process, are investigated through experiments and geometrical analysis. A corner with inner and outer surfaces is assumed to be made up of one arc-surface patch and two flat-surface patches. Based on the previous findings that the change of material removal per tooth affects the geometry of the end-milled side wall, it is expected that the geometrically defected regions are located around the corner when the tool is approaching and leaving the arc surface. In this respect, analytic models are proposed to predict the location and the size of a geometrically defected region, which are then validated via comparison with the experimental results. This paper was recommended for publication in revised form by Associate Editor Dae-Eun Kim Kun Sang Lee received his B. S. degree in Mechanical Engineering from Seoul National University, Korea, in 1982. He then received his Dipl.-Ing. and Dr.-Ing. degrees from Technical University of Berlin, Germany, in 1991 and 1993, respectively. Dr. Lee is currently a Professor at the School of Mechanical and Automotive Engineering at Kookmin University in Seoul, Korea. He serves as a Staff of the Korea Engineering Education Research Center. His research interests include precision machining, high energy beam material processing, and creative design methodology. Kang Kim received his B. S. and M. S. degrees in Mechanical Design and Production Engineering from Seoul National University, Korea, in 1982 and 1984, respectively. He then received his Ph.D. degree from Purdue University, USA, in 1992. Dr. Kim is currently a Professor at the School of Mechanical and Automotive Engineering at Kookmin University in Seoul, Korea. His research interests include material removal processes, and concurrent engineering.