首页 | 本学科首页   官方微博 | 高级检索  
     

面齿轮磨削齿面齿形误差修正
引用本文:明兴祖,方曙光,王红阳. 面齿轮磨削齿面齿形误差修正[J]. 中国机械工程, 2018, 29(17): 2031
作者姓名:明兴祖  方曙光  王红阳
作者单位:1.湖北文理学院机械工程学院,襄阳,4410532.湖南工业大学机械工程学院,株洲,412007
基金项目:国家自然科学基金资助项目(51375161);湖南省自然科学基金资助项目(2017JJ4023)National Natural Science Foundation of China (No. 51375161)Hunan Provincial Natural Science Foundation of China (No. 2017JJ4023)
摘    要:以面齿轮齿面的形状误差为研究对象,建立了面齿轮齿面数学方程,通过三坐标测量仪(CMM)对面齿轮齿面进行了误差测量。为提高面齿轮齿面的精度,提高其理论和工程的应用价值,提出了一种基于序列二次规划(SQP)的面齿轮齿面误差评定方法。建立了齿面误差的识别方程,应用序列二次规划算法对机床加工参数进行优化求解,并与最小二乘优化法进行对比,应用修正后的机床调整参数,再次通过三坐标测量仪对修正后的齿面误差进行检测,验证了该方法的可行性。

关 键 词:面齿轮  三坐标测量仪  序列二次规划  机床调整参数  误差测量  

Tooth Surface Form Error Correction for Face Gear Grinding
MING Xingzu,FANG Shuguang,WANG Hongyang. Tooth Surface Form Error Correction for Face Gear Grinding[J]. China Mechanical Engineering, 2018, 29(17): 2031
Authors:MING Xingzu  FANG Shuguang  WANG Hongyang
Affiliation:1.School of Mechanical Engineering,Hubei University of Arts and Science,Xiangyang,Hubei,4410532.School of Mechanical Engineering,Hunan University of Technology,Zhuzhou,Hunan,412007
Abstract:The form errors of the face gear tooth surfaces were taken as the research object, the mathematical model of face gear tooth surfaces was established,and the error measurements of face gear tooth surfaces were conducted by CMM. In order to improve the accuracy of face gear tooth surfaces and enhance the application values of theory and engineering, an error assessment method of face gear tooth surfaces was proposed based on SQP. With the identification equation of the tooth surface errors was established, the processing parameters of the machine tools were optimized by using SQP algorithm. And compared with the least squares optimization method, the modified machine tool adjustment parameters were applied, the modified tooth surface errors were detected by CMM again, which verified the feasibility of the method.
Keywords:face gear   coordinate measuring machine(CMM)   sequential quadratic programming (SQP)   machine tool adjustment parameter   error measurement  
本文献已被 CNKI 等数据库收录!
点击此处可从《中国机械工程》浏览原始摘要信息
点击此处可从《中国机械工程》下载免费的PDF全文
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号