首页 | 本学科首页   官方微博 | 高级检索  
     

喷雾热分解法制备ITO薄膜及其光电性能研究
引用本文:周洋,武光明,高德文,邢光建,朱艳英,张志乾,曹阳. 喷雾热分解法制备ITO薄膜及其光电性能研究[J]. 纳米科技, 2012, 0(2): 44-49
作者姓名:周洋  武光明  高德文  邢光建  朱艳英  张志乾  曹阳
作者单位:北京石油化工学院,北京102617
基金项目:北京市教育委员会科技发展计划资助项目(KM20111007004)
摘    要:采用自制的喷雾热分解装置在玻璃衬底上制备ITO薄膜,并对实验条件进行了正交设计,以考察制备ITO薄膜的优良条件,结果表明,影响ITO薄膜光电性能的主要因素是基板温度。制备ITO薄膜的优化条件为:基板温度300℃,载气气流速度1L·min^-1,退火温度540℃,溶液配比为铟锡比10:1,喷嘴与基板距离8cm,薄膜沉积时间3.5min,相应的透光率为97%,方块电阻3875Ω/。

关 键 词:喷雾热分解  ITO薄膜  光电性能

Preparation of ITO Thin Films by Spray Pyrolysis and its Physical Properties
ZHOU Yang,WU Guang-ming,GAO De-wen,XING Guang-jian,ZHU Yan-ying,ZHANG Zhi-qian,CAO Yang. Preparation of ITO Thin Films by Spray Pyrolysis and its Physical Properties[J]. , 2012, 0(2): 44-49
Authors:ZHOU Yang  WU Guang-ming  GAO De-wen  XING Guang-jian  ZHU Yan-ying  ZHANG Zhi-qian  CAO Yang
Affiliation:(Beijing institute of Petrochemical Technology, Beijing 102617, China)
Abstract:Indium tin oxide (ITO) films were deposited on glass substrates by using the homemade spray pyrolysis system. Orthogonal test was designed to examine the optimal conditions for the preparated ITO films. The substrate temperature is the main factor on the photoelectric properties of the ITO films. The optimal conditions for preparing the ITO thin films were as following: the substrate temperature is 300℃, the carrier gas flow of the air was 1L·min-1, the annealing temper- ature was 540℃, the proportion of the indium and tin was 10:1, the distance between substrate and; nozzle was 8cm, and the deposition time was 3.5min. The average optical transmittance in the visible range and sheet resistance of the ITO film were 97% and 3875Ω/n, respectively.
Keywords:spray pyrolysis  ITO thin film  photoelectric properties
本文献已被 维普 等数据库收录!
设为首页 | 免责声明 | 关于勤云 | 加入收藏

Copyright©北京勤云科技发展有限公司  京ICP备09084417号