塑封二极管注射模设计 |
| |
引用本文: | 包淑华,朱建荣.塑封二极管注射模设计[J].模具制造,2011,11(6):47-51. |
| |
作者姓名: | 包淑华 朱建荣 |
| |
作者单位: | 1. 华东电子工程研究所,安徽合肥,230088 2. 江苏南通友星机电工业有限公司技术部,江苏南通,226008 |
| |
摘 要: | 以二极管注射模为例,分析了放镶件注射模设计的重点与难点,介绍了塑件成型工艺、浇注系统和模具结构的设计技巧。
|
关 键 词: | 放镶件的模具镶块 成型工艺分析 注射模结构 浇注系统 |
Design of Injection Mold for the Encapsulate Diode |
| |
Abstract: | Taking the encapsulate diode as an example,analyzed the points and difficulty of injection mold with insert block.Plastic molding process,gating system and the mold structure design techniques were introduced. |
| |
Keywords: | put the insert mold set pieces molding process analysis structure of injection mold gating system |
本文献已被 CNKI 维普 万方数据 等数据库收录! |