Fatigue crack propagation in tensile shear stainless steel spot welded specimens

Fatigue tests were carried out on 4 mm thick spot welded joints; the material was stainless steel AISI 301, quarter hard. Some specimens were instrumented with a strain gauge bonded in correspondence with one of the edges of the spot weld. Strain gauge output was demonstrated to be a reliable instrument to monitor the nucleation and propagation of fatigue cracks. A good correlation was found between strain gauge output and spent fatigue life. Some fatigue tests were suspended when the strain gauge output was equal to pre-fixed values, corresponding to fatigue life in the range from 15 to 85%. Subsequently, the specimens were dissected to observe fatigue cracks. The same correlation existed between crack depth and fatigue life. Small cracks were observed in specimens fatigue tested up to 15% of the mean fatigue life; fatigue cracks in the joints under examination would be nucleated between 5 and 10% of fatigue life.
Finite Element calculations were carried out, introducing in the models cracks similar to those observed in the fatigue tests. Calculated strain at the external surface compared well with the measured strain as a function of crack depth. Calculations demonstrated that small errors in strain gauge position can be tolerated without appreciable deterioration in crack dimension prediction.